Case-IH Magnum 7210 vs Fiat 1580 (DT)

13 material differences

Tractor one

1994–1997

No measured PTO figure

Tractor two

1979–1984

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7210 and the 1580 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7210 and Fiat 1580 (DT), field by field
Field	Magnum 7210	1580 (DT)	Gap
Engine
Engine power, claimed claimed	153 hp	153.0 hp	—
Engine declared	CUMMINS 6 T-830	FIAT-IVECO 8365.25.500 or 8365.05.501	differs
Displacement declared	8.27 L	8.10 L	—
Maximum torque declared	471 lb·ft · 638 N·m	423–456 lb·ft · 573–618 N·m	differs
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Oil-immersed CASE-IH multi-plate clutch, nine plates with 228.5 mm diameter	Pedal-operated Ferodo or LuK single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	29.1 gpm · 110 L/min	14.7 gpm · 55.8 L/min	+97% Magnum 7210
Pressure declared	—	3,336–3,481 psi · 230–240 bar	—
Three-point lift at ends declared	15,873 lb · 7,200 kg	10,878 lb · 4,934 kg	+46% Magnum 7210
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	16,590 lb · 7,525 kg	14,330 lb · 6,500 kg	+16% Magnum 7210
Maximum permissible mass declared	24,912 lb · 11,300 kg	22,046 lb · 10,000 kg	+13% Magnum 7210
Wheelbase declared	118.3 in · 3,006 mm	116.7 in · 2,963 mm	—
Length declared	208.3 in · 5,290 mm	170.3 in · 4,325 mm	+22% Magnum 7210
Width declared	112.0 in · 2,845 mm	92.9 in · 2,360 mm	+21% Magnum 7210
Height declared	117.4 in · 2,982 mm	109.6 in · 2,785 mm	+7% Magnum 7210
Ground clearance declared	15.9 in · 404 mm	27.4 in · 695 mm	+72% 1580 (DT)
Turning radius, braked declared	15.6 ft · 4.75 m	15.1 ft · 4.60 m	—
Fuel tank declared	380.4 qt · 360.0 L	190.2 qt · 180.0 L	+100% Magnum 7210

Source

Source