Case-IH 9130 vs International Harvester 7288
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9130 and the 7288 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 9130 | 7288 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 217.0 hp | 207.2 hp | — |
| Engine declared | CUMMINS 6 CTA-8.3 | INTERNATIONAL HARVESTER DTI-466 C | differs |
| Displacement declared | 8.27 L | 7.64 L | +8% 9130 |
| Maximum torque declared | 646 lb·ft · 876 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Oil immersed multi-plate driving clutch with disc diameter | Pedal-operated wet multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.3 gpm · 107.1 L/min | 28.0 gpm · 106.0 L/min | — |
| Pressure declared | 2,306 psi · 159 bar | — | — |
| Three-point lift at ends declared | 13,375 lb · 6,067 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 21,076 lb · 9,560 kg | 19,749 lb · 8,958 kg | +7% 9130 |
| Wheelbase declared | 120.4 in · 3,058 mm | 115.5 in · 2,934 mm | — |
| Length declared | 244.5 in · 6,210 mm | 239.1 in · 6,073 mm | — |
| Width declared | 119.7 in · 3,040 mm | 112.0 in · 2,845 mm | +7% 9130 |
| Height declared | 129.5 in · 3,290 mm | 128.9 in · 3,274 mm | — |
| Ground clearance declared | 14.5 in · 368 mm | 20.5 in · 521 mm | +42% 7288 |
| Turning radius, braked declared | 19.4 ft · 5.91 m | — | — |
| Fuel tank declared | 459.7 qt · 435.0 L | 356.1–636.1 qt · 337.0–602.0 L | differs |
Case-IH 9130 sources
Source
- Source: Traktorenlexikon, “Case-IH 9130”
International Harvester 7288 sources
Source
- Source: Traktorenlexikon, “IHC 7288”