- Articulated
- WhichTractor size: High-power
- Not independently tested
- 1987–1990
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH 9130 Full specifications
CUMMINS 6 CTA-8.3 six-cylinder diesel. The manufacturer claimed 217.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
217.0 hp
161.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 9130”, claimed
- Weight
- 21,076 lb
- 3-point lift
- 13,375 lb
- Hyd. flow
- 28.3 gpm
- Top speed
- 18.6 mph
Case-IH 9130 specs: key facts
The Case-IH 9130 was built from 1987 to 1990.
The Case-IH 9130 has a claimed engine power (gross or net not stated) of 161.8 kW (217.0 hp); it has no measured PTO figure.
The Case-IH 9130 is four-wheel drive (4WD).
The Case-IH 9130 has a CUMMINS 6 CTA-8.3 engine, a 6-cylinder 8.27 L diesel unit.
The Case-IH 9130 weighs 9,560 kg (21,076 lb) unladen.
The Case-IH 9130 has a rear PTO running at 1000 rpm.
The three-point hitch of the Case-IH 9130 lifts 6,067 kg (13,375 lb) at the lower-link ends.
The hydraulic pump of the Case-IH 9130 delivers 107.1 L/min (28.3 gpm).
Source · Traktorenlexikon, “Case-IH 9130”
How much horsepower does a 9130 have?
The only figure for the 9130 is 217.0 hp (161.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 9130”
What engine is in a 9130?
A 9130 has a CUMMINS 6 CTA-8.3, a 6-cylinder 8.27 L diesel engine.
| Make & model | CUMMINS 6 CTA-8.3 |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 504.5 ci · 8.27 L |
| Max torque | 646 lb·ft · 876 N·m @ 1,400 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH 9130”
How much will a 9130 lift, and what is its hydraulic flow?
A 9130 lifts 13,375 lb (6,067 kg) at the lower-link ends of its Category 3 three-point hitch.
| Pump flow | 28.3 gpm · 107.1 L/min |
|---|---|
| Pressure | 2,306 psi · 159 bar |
| Hitch category | Category 3 |
| Lift at ends | 13,375 lb · 6,067 kg |
| Rear PTO | 1000 rpm |
| PTO shaft | 1 3/4"- 20 teilig |
Source · Traktorenlexikon, “Case-IH 9130”
What transmission does a 9130 have?
Transmission specifications for the 9130 are below.
| Clutch | Oil immersed multi-plate driving clutch with disc diameter |
|---|---|
| Brakes | Pedal operated hydraulic Kelsey Hayes disc brake acting on transmission input shaft |
| Steering | Hydrostatic Eaton steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Case-IH 9130”
How much does a 9130 weigh?
A 9130 weighs 21,076 lb (9,560 kg) unladen.
| Unladen weight | 21,076 lb · 9,560 kg |
|---|---|
| Wheelbase | 120.4 in · 3,058 mm |
| Length | 244.5 in · 6,210 mm |
| Width | 119.7 in · 3,040 mm |
| Height | 129.5 in · 3,290 mm |
| Ground clearance | 14.5 in · 368 mm |
| Front track | 60.0–130.0 in · 1,524–3,302 mmWikibooks gives one track for both axles |
| Rear track | 60.0–130.0 in · 1,524–3,302 mmWikibooks gives one track for both axles |
| Turning radius, braked | 19.4 ft · 5.91 m |
Source · Traktorenlexikon, “Case-IH 9130”
Which tractors compare with a 9130?
Within 10% of its 191.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.
Everything else people ask
Is a 9130 two-wheel drive or four-wheel drive?
The Case-IH 9130 is four-wheel drive (4WD).
What PTO does a 9130 have?
A 9130 has a 1000 rpm rear PTO on a 1 3/4"- 20 teilig shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH 9130”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 9130 — CC BY-SA 4.0, WIKIBOOKS-TL-115580 · revision 978452. Wikibooks contributors (Traktorenlexikon). Original document