- Vehicle type: unspecified
- Articulated
- WhichTractor size: High-power
- Not independently tested
- 1985
- 19 built
It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
International Harvester 7288 Full specifications
INTERNATIONAL HARVESTER DTI-466 C six-cylinder diesel. The manufacturer claimed 207.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
207.2 hp
154.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 7288”, claimed
- Weight
- 19,749 lb
- Hyd. flow
- 28.0 gpm
- Top speed
- 18.6 mph
International Harvester 7288 specs: key facts
The International Harvester 7288 was built in 1985.
The International Harvester 7288 has a claimed engine power (gross or net not stated) of 154.5 kW (207.2 hp); it has no measured PTO figure.
The International Harvester 7288 is four-wheel drive (4WD).
The International Harvester 7288 has a INTERNATIONAL HARVESTER DTI-466 C engine, a 6-cylinder 7.64 L diesel unit.
The International Harvester 7288 weighs 8,958 kg (19,749 lb) unladen.
The International Harvester 7288 has a rear PTO running at 1000 rpm.
The hydraulic pump of the International Harvester 7288 delivers 106.0 L/min (28.0 gpm).
Source · Traktorenlexikon, “IHC 7288”
How much horsepower does a 7288 have?
The only figure for the 7288 is 207.2 hp (154.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 7288”
What engine is in a 7288?
A 7288 has an INTERNATIONAL HARVESTER DTI-466 C, a 6-cylinder 7.64 L diesel engine.
| Make & model | INTERNATIONAL HARVESTER DTI-466 C |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 466.0 ci · 7.64 L |
| Electrical system | 12 V |
Source · Traktorenlexikon, “IHC 7288”
How much will a 7288 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 7288 are below.
| Pump flow | 28.0 gpm · 106.0 L/min |
|---|---|
| Rear PTO | 1000 rpm |
Source · Traktorenlexikon, “IHC 7288”
What transmission does a 7288 have?
Transmission specifications for the 7288 are below.
| Clutch | Pedal-operated wet multi-plate clutch |
|---|---|
| Brakes | Electrically operated wet disc brakes acting on differential side shafts |
| Steering | Hydraulic steering and adjustable steering wheel |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “IHC 7288”
How much does a 7288 weigh?
A 7288 weighs 19,749 lb (8,958 kg) unladen.
| Unladen weight | 19,749 lb · 8,958 kg |
|---|---|
| Wheelbase | 115.5 in · 2,934 mm |
| Length | 239.1 in · 6,073 mm |
| Width | 112.0 in · 2,845 mm |
| Height | 128.9 in · 3,274 mm |
| Ground clearance | 20.5 in · 521 mm |
Source · Traktorenlexikon, “IHC 7288”
Everything else people ask
Is a 7288 two-wheel drive or four-wheel drive?
The International Harvester 7288 is four-wheel drive (4WD).
What PTO does a 7288 have?
A 7288 has a 1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “IHC 7288”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 7288 — CC BY-SA 4.0, WIKIBOOKS-TL-119181 · revision 1037713. Wikibooks contributors (Traktorenlexikon). Original document