Case-IH 9110 vs International Harvester 4186

10 material differences · fewer than 12

Tractor one

1987–1990

No measured PTO figure

Tractor two

1976–1978

No measured PTO figure

Which should you choose?

Read our verdict on the 9110 and the 4186 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH 9110 and International Harvester 4186, field by field
Field	9110	4186	Gap
Engine
Engine power, claimed claimed	197.3 hp	150.9 hp	+31% 9110
Engine declared	CUMMINS 6 CT-8.3	INTERNATIONAL HARVESTER DT-436	differs
Displacement declared	8.27 L	7.14 L	+16% 9110
Maximum torque declared	555 lb·ft · 752 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	F.T.K. multi-plate clutch running in oil bath with disc diameter	—	—
Hydraulics & hitch
Pump flow declared	28.3 gpm · 107.1 L/min	18.0 gpm · 68.1 L/min	+57% 9110
Pressure declared	2,306 psi · 159 bar	—	—
Three-point lift at ends declared	13,375 lb · 6,067 kg	—	—
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	20,150 lb · 9,140 kg	16,325 lb · 7,405 kg	+23% 9110
Wheelbase declared	120.4 in · 3,058 mm	102.0 in · 2,591 mm	+18% 9110
Length declared	244.5 in · 6,210 mm	194.0 in · 4,928 mm	+26% 9110
Width declared	119.7 in · 3,040 mm	103.0 in · 2,616 mm	+16% 9110
Height declared	129.5 in · 3,290 mm	139.0 in · 3,531 mm	+7% 4186
Ground clearance declared	14.5 in · 368 mm	17.0 in · 432 mm	+17% 4186
Turning radius, braked declared	19.2 ft · 5.85 m	—	—
Fuel tank declared	459.7 qt · 435.0 L	400.0 qt · 378.5 L	+15% 9110

Source

Source