- Articulated
- WhichTractor size: High-power
- No lab test on file
- 1976–1978
- 650 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 4186 specs: hp, weight, years
INTERNATIONAL HARVESTER DT-436 six-cylinder diesel. The manufacturer claimed 150.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
150.9 hp
112.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 4186”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 16,325 lb
- Hyd. flow
- 18.0 gpm
- Top speed
- 18.6 mph
International Harvester 4186 specs: key facts
The International Harvester 4186 was built from 1976 to 1978.
The International Harvester 4186 has a claimed engine power (gross or net not stated) of 112.5 kW (150.9 hp); it has no measured PTO figure.
The International Harvester 4186 is four-wheel drive (4WD).
The International Harvester 4186 has a INTERNATIONAL HARVESTER DT-436 engine, a 6-cylinder 7.14 L diesel unit.Source 1
The International Harvester 4186 weighs 7,405 kg (16,325 lb) unladen.
The International Harvester 4186 has a rear PTO running at 1000 rpm.
The hydraulic pump of the International Harvester 4186 delivers 68.1 L/min (18.0 gpm).
Source · Traktorenlexikon, “IHC 4186”
How does the 4186 compare with its class?
- Limitation:
Eight forward gears is low for its class — 56% below the median of 18 across the 184 machines within 10% of its power that hold this figure.
- Limitation:
The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 201 tractors within 10% of its power, 10% carry one.
Derived by WhichTractor from 201 comparable records. How we work this out
How much horsepower does a 4186 have?
The only figure for the 4186 is 150.9 hp (112.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 4186”
What engine is in a 4186?
A 4186 has an INTERNATIONAL HARVESTER DT-436, a 6-cylinder 7.14 L diesel engine.
| Make & model | INTERNATIONAL HARVESTER DT-436 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 435.6 ci · 7.14 L |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “IHC 1466”
How much will a 4186 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 4186 are below.
| Pump flow | 18.0 gpm · 68.1 L/min |
|---|---|
| Hitch category | Category 3 |
| Rear PTO | 1000 rpm |
Source · Traktorenlexikon, “IHC 4186”
What transmission does a 4186 have?
Transmission specifications for the 4186 are below.
| Brakes | Hydraulically operated disc brakes acting on differential side shafts |
|---|---|
| Steering | Hydraulic four-wheel steering with servo assistance |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “IHC 4186”
How much does a 4186 weigh?
A 4186 weighs 16,325 lb (7,405 kg) unladen.
| Unladen weight | 16,325 lb · 7,405 kg |
|---|---|
| Wheelbase | 102.0 in · 2,591 mm |
| Length | 194.0 in · 4,928 mm |
| Width | 103.0 in · 2,616 mm |
| Height | 139.0 in · 3,531 mm |
| Ground clearance | 17.0 in · 432 mm |
| Front track | 80.0 in · 2,032 mmWikibooks gives one track for both axles |
| Rear track | 80.0 in · 2,032 mmWikibooks gives one track for both axles |
Source · Traktorenlexikon, “IHC 4186”
What oil does a 4186 take, and how much?
A 4186 engine takes 15.3 qt (14.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 15.3 qt · 14.5 LSource: Traktorenlexikon, “IHC 4186” · single source, not independently verified |
| Cooling system | 32.0 qt · 30.3 LSource: Traktorenlexikon, “IHC 4186” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Common questions about the International Harvester 4186
Is a 4186 two-wheel drive or four-wheel drive?
The International Harvester 4186 is four-wheel drive (4WD).
What PTO does a 4186 have?
A 4186 has a 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “IHC 1466”; and Traktorenlexikon, “IHC 4186”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 1466 — CC BY-SA 4.0, WIKIBOOKS-TL-118879 · revision 1055412. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: IHC 4186 — CC BY-SA 4.0, WIKIBOOKS-TL-119111 · revision 1036816. Wikibooks contributors (Traktorenlexikon). Original document