Case-IH 9110 or International Harvester 4186?
Which should you choose?
On performance, every comparable figure that differs favours the Case-IH 9110: power at the PTO shaft and hydraulic flow. It is also ahead on forward gears.
- The Case-IH 9110 suits PTO-driven implements (mowers, balers, pumps) better on this data: 10% (11.7 kW / 15.8 hp) more power at the PTO shaft.
- The Case-IH 9110 suits loader and hydraulic implement work better on this data: 57% (39.0 L/min / 10.3 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9110 | 4186 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 125.6 kW (168.4 hp)Traktorenlexikon, “Case-IH 9110” | 113.9 kW (152.7 hp)Traktorenlexikon, “IHC 4186” | AheadThe Case-IH 9110 has 10% more power at the PTO (11.7 kW / 15.8 hp) than the International Harvester 4186 (both power at the PTO, claimed). |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9110 and the 4186. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9110 and the 4186. |
| Which pumps more oil for implements? | 107.1 L/min (28.3 gpm)Traktorenlexikon, “Case-IH 9110” | 68.1 L/min (18.0 gpm)Traktorenlexikon, “IHC 4186” | AheadThe Case-IH 9110 has 57% more hydraulic flow (39.0 L/min / 10.3 gpm) than the International Harvester 4186 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 6,067 kg (13,375 lb)Traktorenlexikon, “Case-IH 9110” | — | No figureNo call on three-point lift: no figure on record for the 4186. |
| Which is heavier, for traction? | 9,140 kg (20,150 lb)Traktorenlexikon, “Case-IH 9110” | 7,405 kg (16,325 lb)Traktorenlexikon, “IHC 4186” | Ahead (a fact, not an advantage)The Case-IH 9110 is 23% heavier (1,735 kg / 3,825 lb) than the International Harvester 4186 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 9110 and the 4186. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Case-IH 9110” | 8Traktorenlexikon, “IHC 4186” | AheadThe Case-IH 9110 has 50% more forward gears (4 gears) than the International Harvester 4186 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9110 and the 4186. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 9110” | 30 km/h (18.6 mph)Traktorenlexikon, “IHC 4186” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Case-IH 9110” | 1000 rpmTraktorenlexikon, “IHC 4186” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 9110 and the 4186. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 9110” | 4WDTraktorenlexikon, “IHC 4186” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–1990 | 1976–1978 | Ahead (a fact, not an advantage)The Case-IH 9110 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH 9110 has 10% more power at the PTO (11.7 kW / 15.8 hp) than the International Harvester 4186 (both power at the PTO, claimed).
- The Case-IH 9110 has 57% more hydraulic flow (39.0 L/min / 10.3 gpm) than the International Harvester 4186 (both pump flow, as stated by the source).
- The Case-IH 9110 is 23% heavier (1,735 kg / 3,825 lb) than the International Harvester 4186 (both unladen weight, as stated by the source).
- The Case-IH 9110 has 50% more forward gears (4 gears) than the International Harvester 4186 (both forward gears, as stated by the source).
- The Case-IH 9110 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources