AGRIFULL 80-66 (DT) vs John Deere 2355 (A)

9 material differences · fewer than 12

Tractor one

1980–1986

No measured PTO figure

Tractor two

1987–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 80-66 (DT) and the 2355 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

AGRIFULL 80-66 (DT) and John Deere 2355 (A), field by field
Field	80-66 (DT)	2355 (A)	Gap
Engine
Engine power, claimed claimed	67 hp	66.1 hp	—
Engine declared	MWM D-325-4	John Deere 4.239 DL-007 or DL-010	differs
Displacement declared	3.40 L	3.92 L	+15% 2355 (A)
Maximum torque declared	153 lb·ft · 208 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 2355 (A)
Clutch declared	Dry VALEO or LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	8.5 gpm · 32.1 L/min	14.7 gpm · 55.5 L/min	+73% 2355 (A)
Pressure declared	3,118 psi · 215 bar	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,556 lb · 2,520 kg	6,779 lb · 3,075 kg	+22% 2355 (A)
Wheelbase declared	90.7 in · 2,305 mm	89.7 in · 2,279 mm	—
Length declared	134.3 in · 3,412 mm	145.0 in · 3,683 mm	+8% 2355 (A)
Width declared	76.0 in · 1,930 mm	89.4 in · 2,270 mm	+18% 2355 (A)
Height declared	92.7 in · 2,355 mm	102.2 in · 2,595 mm	+10% 2355 (A)
Ground clearance declared	20.7 in · 525 mm	15.7 in · 400 mm	+31% 80-66 (DT)
Turning radius, braked declared	12.6 ft · 3.84 m	—	—
Fuel tank declared	84.5 qt · 80.0 L	88.8 qt · 84.0 L	—

Source

Source