• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1998–2003

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 8550 HiTech Full specifications

VALMET 634 DSR (E) six-cylinder diesel. The manufacturer claimed 157.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

157.8 hp

117.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”, claimed

Weight
11,244 lb
3-point lift
15,212 lb
Hyd. flow
19.4 gpm
Top speed
24.9–31.1 mph

VALMET 8550 HiTech specs: key facts

  • The VALMET 8550 HiTech was built from 1998 to 2003.

  • The VALMET 8550 HiTech has a claimed engine power (gross or net not stated) of 117.7 kW (157.8 hp); it has no measured PTO figure.

  • The VALMET 8550 HiTech is four-wheel drive (4WD).

  • The VALMET 8550 HiTech has a VALMET 634 DSR (E) engine, a 6-cylinder 7.37 L diesel unit.Source 1

  • The VALMET 8550 HiTech weighs 5,100 kg (11,244 lb) unladen.

  • The VALMET 8550 HiTech has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the VALMET 8550 HiTech lifts 6,900 kg (15,212 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 8550 HiTech delivers 73.6 L/min (19.4 gpm).

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”

How much horsepower does an 8550 HiTech have?

The only figure for the 8550 HiTech is 157.8 hp (117.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
157.8 hp

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”

What engine is in an 8550 HiTech?

An 8550 HiTech has a VALMET 634 DSR (E), a 6-cylinder 7.37 L diesel engine.

Engine — 8550 HiTech engine specifications
Make & modelVALMET 634 DSR (E)Source 1
Cylinders6, liquid-cooledSource 1
Displacement449.4 ci · 7.37 LSource 1
Max torque479 lb·ft · 650 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”

How much will an 8550 HiTech lift, and what is its hydraulic flow?

An 8550 HiTech lifts 15,212 lb (6,900 kg) at the lower-link ends of its Category 3 three-point hitch.

Hydraulics & PTO — 8550 HiTech hydraulics and PTO specifications
Pump flow19.4 gpm · 73.6 L/min
Pressure3,046 psi · 210 bar
Hitch categoryCategory 3
Lift at ends15,212 lb · 6,900 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,874 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines and 1 3/8"- 21 part

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”

What transmission does an 8550 HiTech have?

Transmission specifications for the 8550 HiTech are below.

Transmission — 8550 HiTech transmission specifications
ClutchPedal-operated dry Fichtel & Sachs single-disc clutch
BrakesPedal-operated wet Valmet multi-disc brake acting on differential side shafts
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”

How much does an 8550 HiTech weigh?

An 8550 HiTech weighs 11,244 lb (5,100 kg) unladen.

Weights & dimensions — 8550 HiTech weights and dimensions
Unladen weight11,244 lb · 5,100 kg
Maximum permissible mass18,739 lb · 8,500 kg
Wheelbase108.2 in · 2,748 mm2,558
Length194.4 in · 4,937 mm
Width85.7 in · 2,178 mm
Height109.6 in · 2,785 mm
Ground clearance20.5 in · 520 mm
Front track60.6–80.1 in · 1,540–2,035 mm
Rear track63.4–83.3 in · 1,610–2,115 mm

Source · Traktorenlexikon, “Valmet Mega-8550 HiTech”

Which tractors compare with an 8550 HiTech?

Within 10% of its 157.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an 8550 HiTech two-wheel drive or four-wheel drive?

The VALMET 8550 HiTech is four-wheel drive (4WD).

What PTO does an 8550 HiTech have?

An 8550 HiTech has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 part shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Valmet Mega-8550”; and Traktorenlexikon, “Valmet Mega-8550 HiTech”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet Mega-8550CC BY-SA 4.0, WIKIBOOKS-TL-116511 · revision 1000202. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Valmet Mega-8550 HiTechCC BY-SA 4.0, WIKIBOOKS-TL-116520 · revision 1008504. Wikibooks contributors (Traktorenlexikon). Original document