Landini 165 DT vs VALMET 8550 HiTech

11 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1998–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 165 DT and the 8550 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Landini 165 DT and VALMET 8550 HiTech, field by field
Field	165 DT	8550 HiTech	Gap
Engine
Engine power, claimed claimed	157.8 hp	157.8 hp	—
Engine declared	Perkins 1006-6 THR 4	VALMET 634 DSR (E)	differs
Displacement declared	5.99 L	7.37 L	+23% 8550 HiTech
Maximum torque declared	426 lb·ft · 577 N·m	479 lb·ft · 650 N·m	+13% 8550 HiTech
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch designed as driving clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.5 L/min	19.4 gpm · 73.6 L/min	+20% 8550 HiTech
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	18,519 lb · 8,400 kg	15,212 lb · 6,900 kg	+22% 165 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,963 lb · 5,880 kg	11,244 lb · 5,100 kg	+15% 165 DT
Maximum permissible mass declared	30,424 lb · 13,800 kg	18,739 lb · 8,500 kg	+62% 165 DT
Wheelbase declared	110.2 in · 2,800 mm	108.2 in · 2,748 mm	—
Length declared	188.2 in · 4,780 mm	194.4 in · 4,937 mm	—
Width declared	97.6 in · 2,480 mm	85.7 in · 2,178 mm	+14% 165 DT
Height declared	113.8 in · 2,890 mm	109.6 in · 2,785 mm	—
Ground clearance declared	20.5 in · 520 mm	20.5 in · 520 mm	—
Turning radius, braked declared	20.7 ft · 6.30 m	—	—
Fuel tank declared	274.7 qt · 260 L	174.4 qt · 165.0 L	+58% 165 DT

Source

Source