9 material differences · fewer than 12
Tractor oneMassey Ferguson MF 26251985–1986No measured PTO figureTractor twoVALMET 805/805-41983–1989No measured PTO figure
Which should you choose?
Read our verdict on the MF 2625 and the 805/805-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 2625 | 805/805-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 93.7 hp | — |
| Engine declared | Perkins A 6.354-4 | VALMET TD 44 DS 8 | differs |
| Displacement declared | 5.80 L | 4.40 L | +32% MF 2625 |
| Maximum torque declared | 269 lb·ft · 365 N·m | 270 lb·ft · 366 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated dry LuK single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 13.5 gpm · 51.2 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,015 lb · 5,450 kg | 7,804 lb · 3,540 kg | +54% MF 2625 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 107.3 in · 2,726 mm | 93.9 in · 2,385 mm | +14% MF 2625 |
| Length declared | 200.0 in · 5,080 mm | 177.8 in · 4,515 mm | +13% MF 2625 |
| Width declared | 91.3 in · 2,320 mm | 83.9 in · 2,130 mm | +9% MF 2625 |
| Ground clearance declared | 17.7 in · 450 mm | 18.7 in · 475 mm | +6% 805/805-4 |
| Turning radius, braked declared | 16.1 ft · 4.90 m | — | — |
| Fuel tank declared | 225.1 qt · 213.0 L | 190.2 qt · 180.0 L | +18% MF 2625 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 2625 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 2625”
- Source: Traktorenlexikon, “Massey Ferguson MF 399”
VALMET 805/805-4 sources
- Source: Traktorenlexikon, “Valmet 805”