- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1997–2002
WhichTractor size, not the maker’s category
VALMET 800 Hydraulics & PTO specs
14 hydraulics and PTO values on record for the 800.
Engine power, claimed · gross or net not stated
79 hp
59 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 800”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 800 lift?
An 800 lifts 7,419 lb (3,365 kg) at the lower-link ends.
| Hydraulic control | Constant flow |
|---|---|
| Pump flow | 14.7 gpm · 55.7 L/min |
| Steering pump flow | 5.8 gpm · 22.0 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 7,419 lb · 3,365 kg |
| Hitch control | Lifting, lowering, floating position, position, mixed, draft control |
Source · Traktorenlexikon, “Valmet 800”
What PTO does an 800 have?
An 800 has a 540E/540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540E/540 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 part |
Source · Traktorenlexikon, “Valmet 800”
Sources and how this page was built
14 hydraulics and PTO values from Traktorenlexikon, “Valmet 800”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 800 — CC BY-SA 4.0, WIKIBOOKS-TL-116444 · revision 998941. Wikibooks contributors (Traktorenlexikon). Original document