- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1996
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 4600 specs: hp, weight, years
VALMET 420 D four-cylinder diesel. The manufacturer claimed 78.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
78.9 hp
58.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 4600”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,945 lb
- 3-point lift
- 6,294 lb
- Hyd. flow
- 10.3 gpm
- Top speed
- 18.6 mph
VALMET 4600 specs: key facts
The VALMET 4600 was built from 1993 to 1996.
The VALMET 4600 has a claimed engine power (gross or net not stated) of 58.8 kW (78.9 hp); it has no measured PTO figure.
The VALMET 4600 is four-wheel drive (4WD).
The VALMET 4600 has a VALMET 420 D engine, a 4-cylinder 4.40 L diesel unit.Source 2
The VALMET 4600 weighs 3,150 kg (6,945 lb) unladen.
The VALMET 4600 has an independent rear PTO running at 540E/540 rpm.
The three-point hitch of the VALMET 4600 lifts 2,855 kg (6,294 lb) at the lower-link ends.
The hydraulic pump of the VALMET 4600 delivers 39.0 L/min (10.3 gpm).
Source · Traktorenlexikon, “Valmet 4600”
How does the 4600 compare with its class?
- Limitation:
Eight forward gears is low for its class — 33% below the median of 12 across the 363 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 372 comparable records. How we work this out
How much horsepower does a 4600 have?
The only figure for the 4600 is 78.9 hp (58.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 4600”
What engine is in a 4600?
A 4600 has a VALMET 420 D, a 4-cylinder 4.40 L diesel engine.
| Make & model | VALMET 420 DSource 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 268.3 ci · 4.40 LSource 2 |
| Max torque | 214 lb·ft · 290 N·m @ 1,450 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 4600”
How much will a 4600 lift, and what is its hydraulic flow?
A 4600 lifts 6,294 lb (2,855 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 10.3 gpm · 39.0 L/min |
|---|---|
| Pressure | 2,901 psi · 200 bar |
| Hitch category | Category 2 |
| Lift at ends | 6,294 lb · 2,855 kg |
| Rear PTO | Independent, engine-driven, 540E/540 rpm @ 1,890 engine rpmEngages under load |
Source · Traktorenlexikon, “Valmet 4600”
What transmission does a 4600 have?
Transmission specifications for the 4600 are below.
| Clutch | Dry double clutch |
|---|---|
| Steering | Hydrostatic steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 4600”
How much does a 4600 weigh?
A 4600 weighs 6,945 lb (3,150 kg) unladen.
| Unladen weight | 6,945 lb · 3,150 kg |
|---|---|
| Wheelbase | 94.0 in · 2,387 mm |
| Length | 149.2 in · 3,790 mm |
| Width | 81.5 in · 2,070 mm |
| Height | 95.1 in · 2,415 mm |
| Ground clearance | 17.1 in · 435 mm |
| Front track | 56.3–71.9 in · 1,430–1,825 mm |
| Rear track | 55.5–71.2 in · 1,409–1,809 mm |
| Turning radius, braked | 14.8 ft · 4.50 m |
Source · Traktorenlexikon, “Valmet 4600”
What oil does a 4600 take, and how much?
A 4600 engine takes 9.5 qt (9.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.5 qt · 9.0 LSource: Traktorenlexikon, “Valmet 4600” · single source, not independently verified |
| Transmission | 24.3 qt · 23.0 LSource: Traktorenlexikon, “Valmet 4600” · single source, not independently verified |
| Hydraulic | 37.0 qt · 35.0 LSource: Traktorenlexikon, “Valmet 4600” · single source, not independently verified |
| Front axle | 6.9 qt · 6.5 LSource: Traktorenlexikon, “Valmet 4600” · single source, not independently verified |
| Cooling system | 10.6 qt · 10.0 LSource: Traktorenlexikon, “Valmet 4600” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 4600?
Within 10% of its 78.9 hp of claimed engine power, the same type, and first built within 15 years of it.
- AGRIFULL A-80 DL78.9 hp engine, claimed · 1993–1995Side by side with the 4600 →
- VALMET 66578.9 hp engine, claimed · 1992–1997Side by side with the 4600 →
- AGCO-ALLIS 568078.9 hp engine, claimed · 1991–1997Side by side with the 4600 →
- AGCO-ALLIS 668078.9 hp engine, claimed · 1991–1997Side by side with the 4600 →
- SAME Silver 80 (DT)78.9 hp engine, claimed · 1995–2004Side by side with the 4600 →
- URSUS 93478.9 hp engine, claimed · 1991–2003Side by side with the 4600 →
Common questions about the VALMET 4600
Is a 4600 two-wheel drive or four-wheel drive?
The VALMET 4600 is four-wheel drive (4WD).
What PTO does a 4600 have?
A 4600 has a independent 540E/540 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Valmet 665”; and Traktorenlexikon, “Valmet 4600”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 4600 — CC BY-SA 4.0, WIKIBOOKS-TL-116455 · revision 999076. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Valmet 665 — CC BY-SA 4.0, WIKIBOOKS-TL-116429 · revision 998457. Wikibooks contributors (Traktorenlexikon). Original document