- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1990–1994
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
VALMET 355 (355/4) Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 355 (355/4).
Engine power, claimed · gross or net not stated
60.2 hp
44.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 355”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 355 (355/4) lift?
A 355 (355/4) lifts 5,688 lb (2,580 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 8.2 gpm · 31.0 L/min |
| Steering pump flow | 3.3 gpm · 12.5 L/min |
| Hydraulic pressure | 4,206 psi · 290 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 5,688 lb · 2,580 kg |
Source · Traktorenlexikon, “Valmet 355”
What PTO does a 355 (355/4) have?
A 355 (355/4) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
Source · Traktorenlexikon, “Valmet 355”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Valmet 355”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 355 — CC BY-SA 4.0, WIKIBOOKS-TL-116373 · revision 997967. Wikibooks contributors (Traktorenlexikon). Original document