- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1977–1982
It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Steyr 8140 (a) Hydraulics & PTO specs
11 hydraulics and PTO values on record for the 8140 (a).
Engine power, claimed · gross or net not stated
118.4 hp
88.3 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8140”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 8140 (a) lift?
An 8140 (a) lifts 4,850 lb (2,200 kg) at the lower-link ends.
| Pump flow | 10.8 gpm · 40.9 L/min |
|---|---|
| Hydraulic pressure | 3,553 psi · 245 bar |
| Lift capacity at ball ends | 4,850 lb · 2,200 kg |
| Lift capacity (point not stated) | 9,965 lb · 4,520 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8140”
What PTO does an 8140 (a) have?
An 8140 (a) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 part |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8140”
Sources and how this page was built
11 hydraulics and PTO values from Traktorenlexikon, “Steyr 8140”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8140 — CC BY-SA 4.0, WIKIBOOKS-TL-84947 · revision 1090097. Wikibooks contributors (Traktorenlexikon). Original document