- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1984
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Steyr 8100 (a) Full specifications
Steyr WD-611.40 six-cylinder diesel. The manufacturer claimed 83.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
83.9 hp
62.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8100”, claimed
- Weight
- 8,095 lb
- 3-point lift
- 8,957 lb
- Hyd. flow
- 9.4 gpm
- Top speed
- 15.5–18.6 mph
Steyr 8100 (a) specs: key facts
The Steyr 8100 (a) was built from 1978 to 1984.
The Steyr 8100 (a) has a claimed engine power (gross or net not stated) of 62.6 kW (83.9 hp); it has no measured PTO figure.
The Steyr 8100 (a) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Steyr 8100 (a) has a Steyr WD-611.40 engine, a 6-cylinder 5.18 L diesel unit.
The Steyr 8100 (a) weighs 3,672 kg (8,095 lb) unladen.
The Steyr 8100 (a) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Steyr 8100 (a) lifts 4,063 kg (8,957 lb) at the lower-link ends.
The hydraulic pump of the Steyr 8100 (a) delivers 35.5 L/min (9.4 gpm).
Source · Traktorenlexikon, “Steyr 8100”
How much horsepower does an 8100 (a) have?
The only figure for the 8100 (a) is 83.9 hp (62.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Steyr 8100”
What engine is in an 8100 (a)?
An 8100 (a) has a Steyr WD-611.40, a 6-cylinder 5.18 L diesel engine.
| Make & model | Steyr WD-611.40 |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 316.3 ci · 5.18 L |
| Max torque | 229 lb·ft · 310 N·m @ 1,400 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Steyr 8100”
How much will an 8100 (a) lift, and what is its hydraulic flow?
An 8100 (a) lifts 8,957 lb (4,063 kg) at the lower-link ends.
| Pump flow | 9.4 gpm · 35.5 L/min |
|---|---|
| Lift at ends | 8,957 lb · 4,063 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,057 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 part |
Source · Traktorenlexikon, “Steyr 8100”
What transmission does an 8100 (a) have?
Transmission specifications for the 8100 (a) are below.
| Top speed | 15.5–18.6 mph · 25–30 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “Steyr 8100”
How much does an 8100 (a) weigh?
An 8100 (a) weighs 8,095 lb (3,672 kg) unladen.
| Unladen weight | 8,095 lb · 3,672 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 98.8 in · 2,509 mmtwo-wheel-drive version |
| Length | 163.0 in · 4,140 mmtwo-wheel-drive version |
| Width | 80.7 in · 2,050 mmtwo-wheel-drive version |
| Height | 101.2 in · 2,570 mm |
| Ground clearance | 16.3 in · 415 mmtwo-wheel-drive version |
| Front track | 57.9–81.5 in · 1,470–2,070 mmtwo-wheel-drive version |
| Rear track | 60.0–70.1 in · 1,524–1,780 mmthe article lists alternatives |
| Turning radius, braked | 13.5 ft · 4.13 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Steyr 8100”
Which tractors compare with an 8100 (a)?
Within 10% of its 76.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Steyr 9086 (a)76.3 hp PTO, claimed · 1993–1995Side by side with the 8100 (a) →
- David Brown 141276.2 hp PTO, claimed · 1974–1980Side by side with the 8100 (a) →
- Case-IH 5120 Maxxum76.4 hp PTO, claimed · 1989–1997Side by side with the 8100 (a) →
- Fiat 850 (DT)76.4 hp PTO, claimed · 1969–1975Side by side with the 8100 (a) →
- Renault 891-4 (S)76.0 hp PTO, claimed · 1977–1982Side by side with the 8100 (a) →
- ZETOR 9520/954076.6 hp PTO, claimed · 1992–1999Side by side with the 8100 (a) →
Everything else people ask
Is an 8100 (a) two-wheel drive or four-wheel drive?
The Steyr 8100 (a) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an 8100 (a) have?
An 8100 (a) has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 part shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Steyr 8100”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8100 — CC BY-SA 4.0, WIKIBOOKS-TL-84958 · revision 993727. Wikibooks contributors (Traktorenlexikon). Original document