8 material differences · fewer than 12
Tractor oneJohn Deere 2950 (A)1983–1988No measured PTO figureTractor twoSteyr 8100 (a)1978–1984No measured PTO figure
Which should you choose?
Read our verdict on the 2950 (A) and the 8100 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 2950 (A) | 8100 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.9 hp | 83.9 hp | — |
| Engine declared | — | Steyr WD-611.40 | — |
| Displacement declared | — | 5.18 L | — |
| Maximum torque declared | — | 229 lb·ft · 310 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated, dry single-disc clutch as driving clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 23.0 gpm · 87.1 L/min | 9.4 gpm · 35.5 L/min | +145% 2950 (A) |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,098 lb · 4,127 kg | 8,095 lb · 3,672 kg | +12% 2950 (A) |
| Maximum permissible mass declared | 13,184 lb · 5,980 kg | — | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 98.8 in · 2,509 mm | — |
| Length declared | 153.1 in · 3,890 mm | 163.0 in · 4,140 mm | +6% 8100 (a) |
| Width declared | 79.9 in · 2,029 mm | 80.7–94.9 in · 2,050–2,410 mm | differs |
| Height, over the cab declared | 108.3 in · 2,750 mm | 101.2 in · 2,570 mm | +7% 2950 (A) |
| Ground clearance declared | 25.6 in · 650 mm | 16.3 in · 415 mm | +57% 2950 (A) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 13.5 ft · 4.13 m | +9% 8100 (a) |
| Fuel tank declared | 129.2 qt · 122.3 L | 128.9 qt · 122.0 L | — |
John Deere 2950 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2950”
Steyr 8100 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 8100”