WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1971–1975

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

OLIVER 1265 Full specifications

FIAT 8035 three-cylinder diesel. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

44.4 hp

33.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Oliver 1265”, claimed

Weight
4,123 lb
Hyd. flow
5.8 gpm
Top speed
15.5 mph

OLIVER 1265 specs: key facts

  • The OLIVER 1265 was built from 1971 to 1975.

  • The OLIVER 1265 has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.

  • The OLIVER 1265 was offered in two-wheel-drive and four-wheel-drive versions.

  • The OLIVER 1265 has a FIAT 8035 engine, a 3-cylinder 2.59 L diesel unit.

  • The OLIVER 1265 weighs 1,870 kg (4,123 lb) unladen.

  • The OLIVER 1265 has an independent rear PTO running at 540 rpm.

  • The hydraulic pump of the OLIVER 1265 delivers 21.8 L/min (5.8 gpm).

Source · Traktorenlexikon, “Oliver 1265”

How much horsepower does a 1265 have?

The only figure for the 1265 is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
44.4 hp

Source · Traktorenlexikon, “Oliver 1265”

What engine is in a 1265?

A 1265 has an FIAT 8035, a 3-cylinder 2.59 L diesel engine.

Engine — 1265 engine specifications
Make & modelFIAT 8035
Cylinders3, liquid-cooled
Displacement158.2 ci · 2.59 L
Max torque108 lb·ft · 147 N·m @ 1,200 rpm
Electrical system12 V

Source · Traktorenlexikon, “Oliver 1265”

How much will a 1265 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 1265 are below.

Hydraulics & PTO — 1265 hydraulics and PTO specifications
Pump flow5.8 gpm · 21.8 L/min
Hitch categoryCategory 1
Rear PTOIndependent, engine-driven, 540 rpm @ 1,967 engine rpmGround-speed PTO available
PTO shaft1 3/8"- 6 splines (Form-A)

Source · Traktorenlexikon, “Oliver 1265”

What transmission does a 1265 have?

Transmission specifications for the 1265 are below.

Transmission — 1265 transmission specifications
ClutchPedal-operated dry FIAT double clutch
SteeringMechanical worm steering
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Oliver 1265”

How much does a 1265 weigh?

A 1265 weighs 4,123 lb (1,870 kg) unladen.

Weights & dimensions — 1265 weights and dimensions
Unladen weight4,123 lb · 1,870 kg4WD: 2,120
Wheelbase77.0 in · 1,955 mm4WD: 1,990
Length115.0 in · 2,921 mm4WD: 3,230
Width62.9 in · 1,597 mm
Height58.6 in · 1,489 mm
Ground clearance17.0 in · 432 mm4WD: 356
Front track50.4–74.0 in · 1,280–1,880 mm4WD: 1,397/1,499; the article lists alternatives
Rear track47.2–74.8 in · 1,200–1,900 mm
Turning radius, braked9.4 ft · 2.86 m4WD: 3,890

Source · Traktorenlexikon, “Oliver 1265”

Which tractors compare with a 1265?

Within 10% of its 38.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 1265 two-wheel drive or four-wheel drive?

The OLIVER 1265 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 1265 have?

A 1265 has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines (Form-A) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Oliver 1265”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Oliver 1265 — CC BY-SA 4.0, WIKIBOOKS-TL-117571 · revision 1014976. Wikibooks contributors (Traktorenlexikon). Original document