WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×1
  • 1999–2002
  • Record: Traktorenlexikon

WhichTractor size, not the maker’s category

New Holland TM 150 Hydraulics & PTO specs

19 hydraulics and PTO values on record for the TM 150.

Engine power, claimed · gross or net not stated

138 hp

103 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “New Holland TM150”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

How much will a TM 150 lift?

A TM 150 lifts 15,335 lb (6,956 kg) at the lower-link ends.

Hydraulics & hitch — TM 150 Hydraulics & hitch
Pump flow31.2 gpm · 118.2 L/min
Hydraulic pressure2,466 psi · 170 bar
Rear remote valves4
Lift capacity at ball ends15,335 lb · 6,956 kg
Front hitch available, optionalYes

Source · Traktorenlexikon, “New Holland TM150”

What PTO does a TM 150 have?

A TM 150 has a 540/540E/1000 rpm rear PTO.

PTO — TM 150 PTO
Rear PTO driveEngine-driven
Rear PTO independenceIndependent
PTO engages under loadYes
Rear PTO speeds540/540E/1000 rpm
Front PTO available, optionalYes

Source · Traktorenlexikon, “New Holland TM150”

How much power does a TM 150 deliver at the PTO?

On OECD Test 1920, the TM 150 delivered 130.9 hp (97.6 kW) at the PTO shaft, at maximum power.

OECD Test 1920 — TM 150 as tested, configuration as printed: “4 WD · M4C7BE - Semi Power Shift Transmission”
PTO power, at maximum power130.9 hp · 97.6 kWAt 876 PTO rpmAt 1,856 engine rpm
PTO power, at rated engine speed124.0 hp · 92.5 kWAt 1,038 PTO rpmAt 2,201 engine rpm
PTO power, at standard PTO speed126.7 hp · 94.5 kWAt 1,000 PTO rpmAt 2,121 engine rpm
PTO shaft speed, at maximum power876 rpm
PTO shaft speed, at rated engine speed1,038 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power39.7 hp · 29.6 kW
Hydraulic pump delivery, at maximum power26.8 gpm · 101.4 L/min
Three-point lift force9,375 lbf · 41.7 kN

Source · OECD test report 1920, 2000

Sources and how this page was built

19 hydraulics and PTO values from Traktorenlexikon, “New Holland TM150”; and OECD test report 1920, 2000.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 920: New Holland TM 150 — Licence not stated by the publisher; facts cited, OECD-1920 · published 2000-09-05 · retrieved 2026-09-14. OECD; testing station SRI, Silsoe, United Kingdom. Original document
  2. Traktorenlexikon: New Holland TM150 — CC BY-SA 4.0, WIKIBOOKS-TL-110734 · revision 993194. Wikibooks contributors (Traktorenlexikon). Original document