- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 2006–2011
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
New Holland T 8040 Hydraulics & PTO specifications
15 hydraulics and PTO values on record for the T 8040.
Engine power, claimed · gross or net not stated
303.7 hp
226.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “New Holland T8040”, claimed
How much will a T 8040 lift?
A T 8040 lifts 22,494 lb (10,203 kg) at the lower-link ends.
| Pump flow | 44.0 gpm · 166.6 L/min |
|---|---|
| Hydraulic pressure | 3,336 psi · 230 bar |
| Rear remote valves | 5 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 22,494 lb · 10,203 kg |
| Lift capacity 610 mm behind ends | 16,349 lb · 7,416 kg |
| Hitch control | Lifting, lowering, neutral, floating, draft, mixed and position control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “New Holland T8040”
What PTO does a T 8040 have?
A T 8040 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,988 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 splines |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “New Holland T8040”
Where this page comes from
15 hydraulics and PTO values from Traktorenlexikon, “New Holland T8040”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: New Holland T8040 — CC BY-SA 4.0, WIKIBOOKS-TL-90141 · revision 993247. Wikibooks contributors (Traktorenlexikon). Original document