• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1990–1995

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 3125 (A) Full specifications

Perkins 1006-6 T 7 six-cylinder diesel. The manufacturer claimed 124.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

124.3 hp

92.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 3125”, claimed

Weight
10,593 lb
3-point lift
11,861 lb
Hyd. flow
13.3 gpm
Top speed
18.6–24.9 mph

Massey Ferguson MF 3125 (A) specs: key facts

  • The Massey Ferguson MF 3125 (A) was built from 1990 to 1995.

  • The Massey Ferguson MF 3125 (A) has a claimed engine power (gross or net not stated) of 92.7 kW (124.3 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 3125 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Massey Ferguson MF 3125 (A) has a Perkins 1006-6 T 7 engine, a 6-cylinder 5.99 L diesel unit.

  • The Massey Ferguson MF 3125 (A) weighs 4,805 kg (10,593 lb) unladen.

  • The Massey Ferguson MF 3125 (A) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson MF 3125 (A) lifts 5,380 kg (11,861 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson MF 3125 (A) delivers 50.3 L/min (13.3 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 3125”

How much horsepower does an MF 3125 (A) have?

The only figure for the MF 3125 (A) is 124.3 hp (92.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
124.3 hp

Source · Traktorenlexikon, “Massey Ferguson MF 3125”

What engine is in an MF 3125 (A)?

An MF 3125 (A) has a Perkins 1006-6 T 7, a 6-cylinder 5.99 L diesel engine.

Engine — MF 3125 (A) engine specifications
Make & modelPerkins 1006-6 T 7
Cylinders6, liquid-cooled
Displacement365.2 ci · 5.99 L
Max torque352 lb·ft · 477 N·m @ 1,344 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 3125”

How much will an MF 3125 (A) lift, and what is its hydraulic flow?

An MF 3125 (A) lifts 11,861 lb (5,380 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — MF 3125 (A) hydraulics and PTO specifications
SystemOpen centre
Pump flow13.3 gpm · 50.3 L/min
Pressure2,277–2,350 psi · 157–162 bar
Hitch categoryCategory 2
Lift at ends11,861 lb · 5,380 kg
Rear PTO540/1000 rpm @ 1,976 engine rpm

Source · Traktorenlexikon, “Massey Ferguson MF 3125”

What transmission does an MF 3125 (A) have?

Transmission specifications for the MF 3125 (A) are below.

Transmission — MF 3125 (A) transmission specifications
ClutchPedal-operated, dry and air-cooled VALEO single-disc clutch
BrakesHydraulically operated, wet Girling disc brake acting on the differential side shafts
SteeringHydrostatic Danfoss steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 3125”

How much does an MF 3125 (A) weigh?

An MF 3125 (A) weighs 10,593 lb (4,805 kg) unladen.

Weights & dimensions — MF 3125 (A) weights and dimensions
Unladen weight10,593 lb · 4,805 kgtwo-wheel-drive version
Maximum permissible mass18,739 lb · 8,500 kg
Maximum front axle load7,275 lb · 3,300 kg
Maximum rear axle load13,228 lb · 6,000 kg
Wheelbase106.1 in · 2,696 mmtwo-wheel-drive version
Length178.2 in · 4,527 mm
Width76.5 in · 1,943 mm
Height113.0 in · 2,869 mm
Ground clearance16.9 in · 428 mm
Front track60.7–91.9 in · 1,543–2,333 mmtwo-wheel-drive version
Rear track62.5–85.8 in · 1,588–2,180 mm

Source · Traktorenlexikon, “Massey Ferguson MF 3125”

Which tractors compare with an MF 3125 (A)?

Within 10% of its 111.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 3125 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson MF 3125 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does an MF 3125 (A) have?

An MF 3125 (A) has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 3125”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 3125CC BY-SA 4.0, WIKIBOOKS-TL-69982 · revision 1020703. Wikibooks contributors (Traktorenlexikon). Original document