- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1977–1982
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 1132 Full specifications
Eicher EDK 6-5 six-cylinder diesel. The manufacturer claimed 131.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
131.3 hp
97.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 1132”, claimed
- Weight
- 12,919 lb
- 3-point lift
- 6,173 lb
- Hyd. flow
- 11.9 gpm
- Top speed
- 18.6 mph
Massey Ferguson MF 1132 specs: key facts
The Massey Ferguson MF 1132 was built from 1977 to 1982.
The Massey Ferguson MF 1132 has a claimed engine power (gross or net not stated) of 97.9 kW (131.3 hp); it has no measured PTO figure.
The Massey Ferguson MF 1132 is four-wheel drive (4WD).
The Massey Ferguson MF 1132 has a Eicher EDK 6-5 engine, a 6-cylinder 5.89 L diesel unit.Source 1
The Massey Ferguson MF 1132 weighs 5,860 kg (12,919 lb) unladen.
The Massey Ferguson MF 1132 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Massey Ferguson MF 1132 lifts 2,800 kg (6,173 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 1132 delivers 45.0 L/min (11.9 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 1132”
How much horsepower does an MF 1132 have?
The only figure for the MF 1132 is 131.3 hp (97.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 1132”
What engine is in an MF 1132?
An MF 1132 has an Eicher EDK 6-5, a 6-cylinder 5.89 L diesel engine.
| Make & model | Eicher EDK 6-5 |
|---|---|
| Cylinders | 6, air-cooledSource 2 |
| Displacement | 359.4 ci · 5.89 L |
| Max torque | 332 lb·ft · 450 N·m @ 1,860 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Eicher 3133”
How much will an MF 1132 lift, and what is its hydraulic flow?
An MF 1132 lifts 6,173 lb (2,800 kg) at the lower-link ends.
| Pump flow | 11.9 gpm · 45.0 L/min |
|---|---|
| Lift at ends | 6,173 lb · 2,800 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,118 engine rpmEngages under load |
| PTO shaft | 29 x 34,9 x 9,7 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 1132”
What transmission does an MF 1132 have?
Transmission specifications for the MF 1132 are below.
| Top speed | 18.6 mph · 30 km/h |
|---|
Source · Traktorenlexikon, “Massey Ferguson MF 1132”
How much does an MF 1132 weigh?
An MF 1132 weighs 12,919 lb (5,860 kg) unladen.
| Unladen weight | 12,919 lb · 5,860 kg |
|---|---|
| Maximum permissible mass | 16,535 lb · 7,500 kg |
| Maximum front axle load | 6,173 lb · 2,800 kg |
| Maximum rear axle load | 12,192 lb · 5,530 kg |
| Wheelbase | 107.5 in · 2,730 mm |
| Length | 181.5 in · 4,610 mm |
| Width | 91.7 in · 2,330 mm |
| Height | 107.1 in · 2,720 mm |
| Ground clearance | 17.1 in · 435 mm |
| Front track | 67.7 in · 1,720 mmWikibooks gives one track for both axles |
| Rear track | 67.7 in · 1,720 mmWikibooks gives one track for both axles |
| Turning radius, braked | 17.7 ft · 5.40 m |
Source · Traktorenlexikon, “Massey Ferguson MF 1132”
Which tractors compare with an MF 1132?
Within 10% of its 126 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Ford 9000126.1 hp PTO, claimed · 1969–1972Side by side with the MF 1132 →
- Fiat 140-90 (DT)126.6 hp PTO, claimed · 1984–1993Side by side with the MF 1132 →
- AGRIFULL A-140 DT Turbo126.6 hp PTO, claimed · 1987–1991Side by side with the MF 1132 →
- Deutz-Fahr DX 160126.7 hp PTO, claimed · 1978–1984Side by side with the MF 1132 →
- OLIVER 2655125.4 hp PTO, claimed · 1971–1972Side by side with the MF 1132 →
- International Harvester 1466125.2 hp PTO, claimed · 1971–1976Side by side with the MF 1132 →
Everything else people ask
Is an MF 1132 two-wheel drive or four-wheel drive?
The Massey Ferguson MF 1132 is four-wheel drive (4WD).
What PTO does an MF 1132 have?
An MF 1132 has a independent 540/1000 rpm rear PTO on a 29 x 34,9 x 9,7 mm shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 1132”; and Traktorenlexikon, “Eicher 3133”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Eicher 3133 — CC BY-SA 4.0, WIKIBOOKS-TL-83044 · revision 963470. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 1132 — CC BY-SA 4.0, WIKIBOOKS-TL-104260 · revision 1024034. Wikibooks contributors (Traktorenlexikon). Original document