WhichTractor
  • Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1995–1999

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 8160 A Full specifications

VALMET 634 DS six-cylinder diesel. The manufacturer claimed 197.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

197.4 hp

147.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 8160”, claimed

Weight
14,815 lb
3-point lift
12,434 lb
Hyd. flow
14.1 gpm
Top speed
18.6–24.9 mph

Massey Ferguson MF 8160 A specs: key facts

  • The Massey Ferguson MF 8160 A was built from 1995 to 1999.

  • The Massey Ferguson MF 8160 A has a claimed engine power (gross or net not stated) of 147.2 kW (197.4 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 8160 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Massey Ferguson MF 8160 A has a VALMET 634 DS engine, a 6-cylinder 7.37 L diesel unit.

  • The Massey Ferguson MF 8160 A weighs 6,720 kg (14,815 lb) unladen.

  • The Massey Ferguson MF 8160 A has an independent rear PTO running at 540/540E/1000 rpm.

  • The three-point hitch of the Massey Ferguson MF 8160 A lifts 5,640 kg (12,434 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson MF 8160 A delivers 53.3 L/min (14.1 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 8160”

How much horsepower does an MF 8160 A have?

The only figure for the MF 8160 A is 197.4 hp (147.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
197.4 hp

Source · Traktorenlexikon, “Massey Ferguson MF 8160”

What engine is in an MF 8160 A?

An MF 8160 A has a VALMET 634 DS, a 6-cylinder 7.37 L diesel engine.

Engine — MF 8160 A engine specifications
Make & modelVALMET 634 DS
Cylinders6, liquid-cooled
Displacement449.4 ci · 7.37 L
Max torque586 lb·ft · 795 N·m @ 1,195 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 8160”

How much will an MF 8160 A lift, and what is its hydraulic flow?

An MF 8160 A lifts 12,434 lb (5,640 kg) at the lower-link ends.

Hydraulics & PTO — MF 8160 A hydraulics and PTO specifications
Pump flow14.1 gpm · 53.3 L/min
Pressure2,901 psi · 200 bar
Lift at ends12,434 lb · 5,640 kg
Rear PTOIndependent, engine-driven, 540/540E/1000 rpm @ 1,993 engine rpmEngages under load

Source · Traktorenlexikon, “Massey Ferguson MF 8160”

What transmission does an MF 8160 A have?

Transmission specifications for the MF 8160 A are below.

Transmission — MF 8160 A transmission specifications
ClutchPedal-operated dry VALEO double clutch
SteeringHydrostatic DANFOSS steering type OSPC-LSD with double-acting steering cylinder
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 8160”

How much does an MF 8160 A weigh?

An MF 8160 A weighs 14,815 lb (6,720 kg) unladen.

Weights & dimensions — MF 8160 A weights and dimensions
Unladen weight14,815 lb · 6,720 kgtwo-wheel-drive version
Maximum permissible mass19,842 lb · 9,000 kg
Maximum front axle load8,818 lb · 4,000 kg
Maximum rear axle load15,873 lb · 7,200 kg
Wheelbase115.7 in · 2,940 mmtwo-wheel-drive version
Length220.9 in · 5,610 mm
Width97.6 in · 2,480 mm
Height119.7 in · 3,040 mm
Ground clearance18.2 in · 463 mm
Front track60.7–91.9 in · 1,543–2,333 mmtwo-wheel-drive version
Rear track72.9–82.9 in · 1,851–2,105 mm

Source · Traktorenlexikon, “Massey Ferguson MF 8160”

Which tractors compare with an MF 8160 A?

Within 10% of its 178.6 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 8160 A two-wheel drive or four-wheel drive?

The Massey Ferguson MF 8160 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does an MF 8160 A have?

An MF 8160 A has a independent 540/540E/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 8160”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 8160 — CC BY-SA 4.0, WIKIBOOKS-TL-87648 · revision 992214. Wikibooks contributors (Traktorenlexikon). Original document