• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1995–1999

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 8140 A Full specifications

Valmet 620 DS six-cylinder diesel. The manufacturer claimed 158.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

158.0 hp

117.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 8140”, claimed

Weight
13,481 lb
3-point lift
12,434 lb
Hyd. flow
14.1 gpm
Top speed
18.6–24.9 mph

Massey Ferguson MF 8140 A specs: key facts

  • The Massey Ferguson MF 8140 A was built from 1995 to 1999.

  • The Massey Ferguson MF 8140 A has a claimed engine power (gross or net not stated) of 117.8 kW (158.0 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 8140 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Massey Ferguson MF 8140 A has a Valmet 620 DS engine, a 6-cylinder 6.60 L diesel unit.Source 1

  • The Massey Ferguson MF 8140 A weighs 6,115 kg (13,481 lb) unladen.

  • The Massey Ferguson MF 8140 A has an independent rear PTO running at 540/540E/1000 rpm.

  • The three-point hitch of the Massey Ferguson MF 8140 A lifts 5,640 kg (12,434 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson MF 8140 A delivers 53.3 L/min (14.1 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 8140”

How much horsepower does an MF 8140 A have?

The only figure for the MF 8140 A is 158.0 hp (117.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
158.0 hp

Source · Traktorenlexikon, “Massey Ferguson MF 8140”

What engine is in an MF 8140 A?

An MF 8140 A has a Valmet 620 DS, a 6-cylinder 6.60 L diesel engine.

Engine — MF 8140 A engine specifications
Make & modelValmet 620 DS
Cylinders6, liquid-cooledSource 2
Displacement402.6 ci · 6.60 L
Aspirationsupercharged
Max torque470 lb·ft · 637 N·m @ 1,398 rpmSource 2
Injectiondirect injectionSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Massey Ferguson MF 3670”

How much will an MF 8140 A lift, and what is its hydraulic flow?

An MF 8140 A lifts 12,434 lb (5,640 kg) at the lower-link ends.

Hydraulics & PTO — MF 8140 A hydraulics and PTO specifications
Pump flow14.1 gpm · 53.3 L/min
Pressure2,901 psi · 200 bar
Lift at ends12,434 lb · 5,640 kg
Rear PTOIndependent, engine-driven, 540/540E/1000 rpm @ 1,993 engine rpmEngages under load

Source · Traktorenlexikon, “Massey Ferguson MF 8140”

What transmission does an MF 8140 A have?

Transmission specifications for the MF 8140 A are below.

Transmission — MF 8140 A transmission specifications
ClutchPedal-operated dry Valeo double clutch
BrakesHydraulically operated wet Girling disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering with double-acting steering cylinder
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 8140”

How much does an MF 8140 A weigh?

An MF 8140 A weighs 13,481 lb (6,115 kg) unladen.

Weights & dimensions — MF 8140 A weights and dimensions
Unladen weight13,481 lb · 6,115 kgtwo-wheel-drive version
Maximum permissible mass25,353 lb · 11,500 kg
Maximum front axle load10,362 lb · 4,700 kg
Maximum rear axle load17,086 lb · 7,750 kg
Wheelbase115.7 in · 2,940 mmtwo-wheel-drive version
Length198.3 in · 5,038 mm
Width83.5 in · 2,120 mm
Height119.4 in · 3,034 mm
Ground clearance18.2 in · 463 mm
Front track60.7–84.6 in · 1,543–2,150 mmtwo-wheel-drive version
Rear track72.9–82.9 in · 1,851–2,105 mm

Source · Traktorenlexikon, “Massey Ferguson MF 8140”

Which tractors compare with an MF 8140 A?

Within 10% of its 147.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 8140 A two-wheel drive or four-wheel drive?

The Massey Ferguson MF 8140 A was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does an MF 8140 A have?

An MF 8140 A has a independent 540/540E/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 3670”; and Traktorenlexikon, “Massey Ferguson MF 8140”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 3670CC BY-SA 4.0, WIKIBOOKS-TL-87099 · revision 1066530. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 8140CC BY-SA 4.0, WIKIBOOKS-TL-87640 · revision 992212. Wikibooks contributors (Traktorenlexikon). Original document