- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1996–1999
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat M 160 Full specifications
New Holland 675 T-WM six-cylinder diesel. The manufacturer claimed 158.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
158.0 hp
117.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiatagri M160”, claimed
- Weight
- 13,404 lb
- 3-point lift
- 14,727 lb
- Hyd. flow
- 26.0 gpm
- Top speed
- 18.6–24.9 mph
Fiat M 160 specs: key facts
The Fiat M 160 was built from 1996 to 1999.
The Fiat M 160 has a claimed engine power (gross or net not stated) of 117.8 kW (158.0 hp); it has no measured PTO figure.
The Fiat M 160 is four-wheel drive (4WD).
The Fiat M 160 has a New Holland 675 T-WM engine, a 6-cylinder 7.48 L diesel unit.Source 2
The Fiat M 160 weighs 6,080 kg (13,404 lb) unladen.
The Fiat M 160 has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Fiat M 160 lifts 6,680 kg (14,727 lb) at the lower-link ends.
The hydraulic pump of the Fiat M 160 delivers 98.4 L/min (26.0 gpm).
Source · Traktorenlexikon, “Fiatagri M160”
How much horsepower does an M 160 have?
The only figure for the M 160 is 158.0 hp (117.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fiatagri M160”
What engine is in an M 160?
An M 160 has a New Holland 675 T-WM, a 6-cylinder 7.48 L diesel engine.
| Make & model | New Holland 675 T-WMSource 2 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 456.3 ci · 7.48 LSource 2 |
| Aspiration | superchargedSource 2 |
| Max torque | 481 lb·ft · 652 N·m @ 1,400 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fiatagri M160”
How much will an M 160 lift, and what is its hydraulic flow?
An M 160 lifts 14,727 lb (6,680 kg) at the lower-link ends.
| Pump flow | 26.0 gpm · 98.4 L/min |
|---|---|
| Pressure | 2,408–2,582 psi · 166–178 bar |
| Lift at ends | 14,727 lb · 6,680 kg |
| Rear PTO | 540/1000 rpm @ 1,971 engine rpm |
| PTO shaft | 1 3/8"- 6 splines (Form-1) or 1 3/8"- 21 piece (Form-2) |
Source · Traktorenlexikon, “Fiatagri M160”
What transmission does an M 160 have?
Transmission specifications for the M 160 are below.
| Clutch | Electro-hydraulically operated running in oil New Holland multi-disc driving clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering type Orbitrol OSPC 160 ON with common oil supply |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Fiatagri M160”
How much does an M 160 weigh?
An M 160 weighs 13,404 lb (6,080 kg) unladen.
| Unladen weight | 13,404 lb · 6,080 kg |
|---|---|
| Maximum permissible mass | 20,944 lb · 9,500 kg |
| Maximum front axle load | 9,921 lb · 4,500 kg |
| Maximum rear axle load | 17,086 lb · 7,750 kg |
| Wheelbase | 107.2 in · 2,723 mm |
| Length | 183.3 in · 4,655 mm |
| Width | 84.1 in · 2,135 mm |
| Height | 111.6 in · 2,835 mm |
| Ground clearance | 14.5 in · 369 mm |
| Front track | 61.1–92.9 in · 1,551–2,359 mm |
| Rear track | 64.2–87.9 in · 1,630–2,232 mm |
Source · Traktorenlexikon, “Fiatagri M160”
Which tractors compare with an M 160?
Within 10% of its 146.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Deutz-Fahr Agrotron M 640146.4 hp PTO, claimed · 2007–2012Side by side with the M 160 →
- Massey Ferguson MF 8140 A147.2 hp PTO, claimed · 1995–1999Side by side with the M 160 →
- Renault 175-74 TZ147.5 hp PTO, claimed · 1989–1992Side by side with the M 160 →
- VOLVO-BM-VALMET Volvo 2105145.8 hp PTO, claimed · 1985–1987Side by side with the M 160 →
- Deutz-Fahr Agrotron TTV 610148 hp PTO, claimed · from 2007Side by side with the M 160 →
- VALMET 8550145.0 hp PTO, claimed · 1995–2001Side by side with the M 160 →
Everything else people ask
Is an M 160 two-wheel drive or four-wheel drive?
The Fiat M 160 is four-wheel drive (4WD).
What PTO does an M 160 have?
An M 160 has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) or 1 3/8"- 21 piece (Form-2) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Fiatagri M160”; and Traktorenlexikon, “New Holland 8560”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiatagri M160 — CC BY-SA 4.0, WIKIBOOKS-TL-108920 · revision 901543. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: New Holland 8560 — CC BY-SA 4.0, WIKIBOOKS-TL-91557 · revision 1014996. Wikibooks contributors (Traktorenlexikon). Original document