- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 2004–2012
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
The source says so, in a sentence about this machine. How we decide what a machine is
Massey Ferguson 7485 specs: hp, weight, years
SISU-Power 66.253 ETA six-cylinder diesel. The manufacturer claimed 162.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
162.8 hp
121.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 7485”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 15,146 lb
- Hyd. flow
- 32.2 gpm
- Top speed
- 24.9–31.1 mph
Massey Ferguson 7485 specs: key facts
The Massey Ferguson 7485 was built from 2004 to 2012.
The Massey Ferguson 7485 has a claimed engine power (gross or net not stated) of 121.4 kW (162.8 hp); it has no measured PTO figure.
The Massey Ferguson 7485 is four-wheel drive (4WD).
The Massey Ferguson 7485 has a SISU-Power 66.253 ETA engine, a 6-cylinder 6.60 L diesel unit.
The Massey Ferguson 7485 weighs 6,870 kg (15,146 lb) unladen.
The Massey Ferguson 7485 has an independent rear PTO running at 540 rpm / 1000 rpm.
The hydraulic pump of the Massey Ferguson 7485 delivers 122.0 L/min (32.2 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 7485”
How does the 7485 compare with its class?
- Strength:
A hydraulic pump flow of 122 L/min is high for its class — 47% above the median of 82.9 L/min across the 134 machines within 10% of its power that hold this figure.
- Limitation:
The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 170 tractors within 10% of its power, 10% carry one.
Derived by WhichTractor from 170 comparable records. How we work this out
How much horsepower does a 7485 have?
The only figure for the 7485 is 162.8 hp (121.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 7485”
What engine is in a 7485?
A 7485 has a SISU-Power 66.253 ETA, a 6-cylinder 6.60 L diesel engine.
| Make & model | SISU-Power 66.253 ETA |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 402.5 ci · 6.60 L |
| Max torque | 462 lb·ft · 626 N·m @ 1,100 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 7485”
How much will a 7485 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 7485 are below.
| System | Load sensing |
|---|---|
| Pump flow | 32.2 gpm · 122.0 L/min |
| Rear PTO | Independent, engine-driven, 540 rpm / 1000 rpm @ 2,062 engine rpmEngages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 7485”
What transmission does a 7485 have?
Transmission specifications for the 7485 are below.
| Top speed | 24.9–31.1 mph · 40–50 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “Massey Ferguson MF 7485”
How much does a 7485 weigh?
A 7485 weighs 15,146 lb (6,870 kg) unladen.
| Unladen weight | 15,146 lb · 6,870 kg |
|---|---|
| Maximum permissible mass | 26,455 lb · 12,000 kg |
| Wheelbase | 118.4 in · 3,007 mm |
| Length | 198.4 in · 5,040 mm |
| Width | 99.6 in · 2,530 mm |
| Height | 122.0 in · 3,100 mm |
| Ground clearance | 18.9 in · 480 mm |
| Front track | 67.0–75.4 in · 1,702–1,915 mm |
| Rear track | 63.1–70.8 in · 1,604–1,798 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 7485”
What oil does a 7485 take, and how much?
A 7485 engine takes 21.1 qt (20.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 21.1 qt · 20.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7485” · single source, not independently verified |
| Transmission | 61.3 qt · 58.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7485” · single source, not independently verified |
| Hydraulic | 105.7 qt · 100.0 LSource: Traktorenlexikon, “Massey Ferguson MF 7485” · single source, not independently verified |
| Cooling system | 30.1 qt · 28.5 LSource: Traktorenlexikon, “Massey Ferguson MF 7485” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 7485?
Within 10% of its 162.8 hp of claimed engine power, the same type, and first built within 15 years of it.
- Renault 175-74 TZ162.8 hp engine, claimed · 1989–1992Side by side with the 7485 →
- Fendt 817 Vario-TMS162 hp engine, claimed · 2003–2009Side by side with the 7485 →
- SAME Titan 165161.7 hp engine, claimed · 1998–2001Side by side with the 7485 →
- Hürlimann H-6165 Master161.7 hp engine, claimed · 1991–2001Side by side with the 7485 →
- Agco RT-140A164.7 hp engine, claimed · 2006–2011Side by side with the 7485 →
- Case-IH Puma 165164.7 hp engine, claimed · 2007–2011Side by side with the 7485 →
Common questions about the Massey Ferguson 7485
Is a 7485 two-wheel drive or four-wheel drive?
The Massey Ferguson 7485 is four-wheel drive (4WD).
What PTO does a 7485 have?
A 7485 has a independent 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Massey Ferguson MF 7485”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 7485 — CC BY-SA 4.0, WIKIBOOKS-TL-71730 · revision 858305. Wikibooks contributors (Traktorenlexikon). Original document