- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 2001–2003
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson 4335 (A) specs: hp, weight, years
Perkins 1004.42 four-cylinder diesel. The manufacturer claimed 77.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
77.0 hp
57.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 4335”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 7,661 lb
- 3-point lift
- 8,992 lb
- Top speed
- 24.9 mph
Massey Ferguson 4335 (A) specs: key facts
The Massey Ferguson 4335 (A) was built from 2001 to 2003.
The Massey Ferguson 4335 (A) has a claimed engine power (gross or net not stated) of 57.4 kW (77.0 hp); it has no measured PTO figure.
The Massey Ferguson 4335 (A) was offered in two-wheel-drive and four-wheel-drive versions.
The Massey Ferguson 4335 (A) has a Perkins 1004.42 engine, a 4-cylinder 4.23 L diesel unit.
The Massey Ferguson 4335 (A) weighs 3,475 kg (7,661 lb) unladen.
The Massey Ferguson 4335 (A) has an independent rear PTO running at 540/1000/540E rpm.
The three-point hitch of the Massey Ferguson 4335 (A) lifts 4,079 kg (8,992 lb) at the lower-link ends.
Source · Traktorenlexikon, “Massey Ferguson MF 4335”
How much horsepower does a 4335 (A) have?
The only figure for the 4335 (A) is 77.0 hp (57.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 4335”
What engine is in a 4335 (A)?
A 4335 (A) has a Perkins 1004.42, a 4-cylinder 4.23 L diesel engine.
| Make & model | Perkins 1004.42 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 258.3 ci · 4.23 L |
| Max torque | 208 lb·ft · 282 N·m @ 1,400 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 4335”
How much will a 4335 (A) lift?
A 4335 (A) lifts 8,992 lb (4,079 kg) at the lower-link ends.
| System | Open centre |
|---|---|
| Pressure | 2,031 psi · 140 bar |
| Lift at ends | 8,992 lb · 4,079 kg |
| Rear PTO | Independent, engine-driven, 540/1000/540E rpm @ 1,902 engine rpmEngages under load |
Source · Traktorenlexikon, “Massey Ferguson MF 4335”
What transmission does a 4335 (A) have?
Transmission specifications for the 4335 (A) are below.
| Clutch | Pedal-operated, dry and air-cooled single-disc clutch |
|---|---|
| Brakes | Hydraulically operated wet Girling multi-disc brake acting on differential side shafts |
| Steering | Hydrostatic Danfoss steering type Orbitrol-OSPC-100-ON with separate oil circuit |
| Top speed | 24.9 mph · 40 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 4335”
How much does a 4335 (A) weigh?
A 4335 (A) weighs 7,661 lb (3,475 kg) unladen.
| Unladen weight | 7,661 lb · 3,475 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 17,350 lb · 7,870 kg |
| Wheelbase | 92.5 in · 2,350 mm |
| Length | 157.9 in · 4,010 mmtwo-wheel-drive version |
| Width | 76.8 in · 1,950 mm |
| Height | 99.6 in · 2,530 mm |
| Ground clearance | 15.7 in · 400 mm |
| Front track | 55.5–75.2 in · 1,410–1,910 mmtwo-wheel-drive version |
| Rear track | 56.3–83.9 in · 1,430–2,130 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 4335”
What oil does a 4335 (A) take, and how much?
A 4335 (A) engine takes 6.9 qt (6.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 6.9 qt · 6.5 LSource: Traktorenlexikon, “Massey Ferguson MF 4335” · single source, not independently verified |
| Hydraulic | 52.8 qt · 50.0 LSource: Traktorenlexikon, “Massey Ferguson MF 4335” · single source, not independently verified |
| Front axle | 7.4 qt · 7.0 LSource: Traktorenlexikon, “Massey Ferguson MF 4335” · single source, not independently verified |
| Cooling system | 18.5 qt · 17.5 LSource: Traktorenlexikon, “Massey Ferguson MF 4335” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 4335 (A)?
Within 10% of its 60.2 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- John Deere 530360.2 hp PTO, measured · 2003–2008Side by side with the 4335 (A) →
- Renault Ceres 32560.7 hp PTO, measured · 2000–2004Side by side with the 4335 (A) →
- Massey Ferguson 3050E61.0 hp PTO, claimed · 1988–1995Side by side with the 4335 (A) →
- Case-IH CX 7062.1 hp PTO, measured · 1998–2000Side by side with the 4335 (A) →
- Fendt Farmer 275 S/SA62.4 hp PTO, claimed · 1988–1996Side by side with the 4335 (A) →
- Case-IH JX7057.9 hp PTO, measured · 2004–2008Side by side with the 4335 (A) →
Common questions about the Massey Ferguson 4335 (A)
Is a 4335 (A) two-wheel drive or four-wheel drive?
The Massey Ferguson 4335 (A) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 4335 (A) have?
A 4335 (A) has a independent 540/1000/540E rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Massey Ferguson MF 4335”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 4335 — CC BY-SA 4.0, WIKIBOOKS-TL-87202 · revision 1020817. Wikibooks contributors (Traktorenlexikon). Original document