12 material differences

Tractor oneJohn Deere 53032003–200860.2 hpMeasured at the PTO · OECD Test 2268Tractor twoMassey Ferguson MF 4335 (A)2001–2003No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their power is not stated as the same quantity on both; their unladen weight differs by more than 25% (57%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

12 material differences · 1 fields identical or within 5%, which is not counted as material

John Deere 5303 and Massey Ferguson MF 4335 (A), field by field
Field5303MF 4335 (A)Gap
Measured performance
PTO power, measured measured60.2 hp——
Drawbar power, measured measured46.9 hp——
Engine
Engine power, claimed claimed—77.0 hp—
Engine declaredJohn Deere 3.029 TPY-11Perkins 1004.42differs
Displacement declared2.90 L4.23 L+46% MF 4335 (A)
Maximum torque declared161 lb·ft · 218.6 N·m208 lb·ft · 282 N·m+29% MF 4335 (A)
Transmission
Top speed declared18.6 mph · 30 km/h24.9 mph · 40 km/h+33% MF 4335 (A)
Clutch declaredDry LuK double clutch with 280 mm diameterPedal-operated, dry and air-cooled single-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredOpen centreOpen centre—
Pump flow declared10.8 gpm · 41.0 L/min——
Pressure declared—2,031 psi · 140 bar—
Rear PTO speeds declared540/1000 rpm540/1000/540E rpmdiffers
Weight & dimensions
Unladen weight declared4,894–5,110 lb · 2,220–2,318 kg7,661 lb · 3,475 kgdiffers
Maximum permissible mass declared—17,350 lb · 7,870 kg—
Wheelbase declared80.3 in · 2,040 mm92.5 in · 2,350 mm+15% MF 4335 (A)
Length declared138.4 in · 3,515 mm157.9 in · 4,010 mm+14% MF 4335 (A)
Width declared73.4–89.6 in · 1,865–2,275 mm76.8 in · 1,950 mmdiffers
Ground clearance declared15.0 in · 380 mm15.7 in · 400 mm+5% MF 4335 (A)
Fuel tank declared72.0 qt · 68.1 L103.6 qt · 98.0 L+44% MF 4335 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

John Deere 5303 sources

Source
  • Source: OECD test report 2268, 2005
  • Source: Traktorenlexikon, “John Deere 5303”

Massey Ferguson MF 4335 (A) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 4335”