- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1988–2000
WhichTractor size, not the maker’s category
Landini R-6860 (DT) TL-21 N/K (TL-21 DT/K) Hydraulics & PTO specs
12 hydraulics and PTO values on record for the R-6860 (DT) TL-21 N/K (TL-21 DT/K).
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 6860”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a R-6860 (DT) TL-21 N/K (TL-21 DT/K) lift?
A R-6860 (DT) TL-21 N/K (TL-21 DT/K) lifts 4,116 lb (1,867 kg) at the lower-link ends.
| Pump flow | 10.1 gpm · 38.4 L/min |
|---|---|
| Steering pump flow | 6.6 gpm · 24.8 L/min |
| Hydraulic pressure | 2,756 psi · 190 bar |
| Rear remote valves | 2 |
| Lift capacity at ball ends | 4,116 lb · 1,867 kg |
| Hitch control | Lifting, lowering, neutral, lowering throttle, float, position, mixed and draft control |
Source · Traktorenlexikon, “Landini 6860”
What PTO does a R-6860 (DT) TL-21 N/K (TL-21 DT/K) have?
A R-6860 (DT) TL-21 N/K (TL-21 DT/K) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,944 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Landini 6860”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Landini 6860”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 6860 — CC BY-SA 4.0, WIKIBOOKS-TL-113002 · revision 942637. Wikibooks contributors (Traktorenlexikon). Original document