• Crawler
  • WhichTractor size: High-power
  • Lab tested ×1
  • 1998–2002

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 9400T specs: hp, weight, years

John Deere 6.125 HRW-08 six-cylinder diesel. The manufacturer claimed 419.5 horsepower. The only laboratory test on record is of one version: OECD Test 1967 measured 346.5 hp at the PTO of the 9400T (Rubber tracklaying tractor). Compared at the engine's rated speed, where the brochure figure is quoted, the shaft gave 299.7 hp — 28.5% below the claim.

Engine power, claimed · gross or net not stated

419.5 hp

312.8 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 9400T”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
42,454 lb
3-point lift
13,669 lb
Hyd. flow
32.2 gpm
Top speed
18.6 mph

John Deere 9400T specs: key facts

  • The John Deere 9400T was built from 1998 to 2002.

  • Only one version of the John Deere 9400T has a laboratory test on record: the 9400T (Rubber tracklaying tractor) produced 258.4 kW (346.5 hp) at the PTO, measured on OECD Test 1967.Source 1

  • The John Deere 9400T has a claimed engine power (gross or net not stated) of 312.8 kW (419.5 hp); it has no measured PTO figure.

  • The John Deere 9400T is a tracked machine.Source 1

  • The John Deere 9400T has a John Deere 6.125 HRW-08 engine, a 6-cylinder 12.54 L diesel unit.

  • The John Deere 9400T weighs 19,257 kg (42,454 lb) unladen.

  • The John Deere 9400T has an independent rear PTO running at 1000 rpm.

  • The three-point hitch of the John Deere 9400T lifts 6,200 kg (13,669 lb) at the lower-link ends.

  • The hydraulic pump of the John Deere 9400T delivers 121.9 L/min (32.2 gpm).

Source · Traktorenlexikon, “John Deere 9400T”

How does the 9400T compare with its class?

We will not rate this machine against its class. Only 14 published tractors sit within 10% of its 313 kW — too few to say what is normal.

Derived by WhichTractor. How we work this out

Illustration of the 1998–2002 John Deere 9400 T, a 419 hp crawler tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a 9400T have?

The only laboratory test on record is of one version. OECD Test 1967 measured 346.5 hp at the PTO of the 9400T (Rubber tracklaying tractor). For the 9400T as a whole the figure is the 419.5 hp claimed for the engine, which is not power at the shaft.

Engine, claimed (gross/net not stated)
419.5 hp

Sources · Traktorenlexikon, “John Deere 9400T”; OECD test report 1967, 2001

What engine is in a 9400T?

A 9400T has a John Deere 6.125 HRW-08, a 6-cylinder 12.54 L diesel engine.

Engine — 9400T engine specifications
Make & modelJohn Deere 6.125 HRW-08
Cylinders6, liquid-cooled
Displacement764.9 ci · 12.54 L
Aspirationsupercharged
Max torque1,154 lb·ft · 1,564 N·m @ 1,100 rpm
Electrical system12 V

Source · Traktorenlexikon, “John Deere 9400T”

How much will a 9400T lift, and what is its hydraulic flow?

A 9400T lifts 13,669 lb (6,200 kg) at the lower-link ends.

Hydraulics & PTO — 9400T hydraulics and PTO specifications
SystemClosed centreSource 1
Pump flow32.2 gpm · 121.9 L/min
Lift at ends13,669 lb · 6,200 kg
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/4"- 20 teilig

Source · Traktorenlexikon, “John Deere 9400T”

What transmission does a 9400T have?

Transmission specifications for the 9400T are below.

Transmission — 9400T transmission specifications
SteeringElectro-hydraulically operated hydrostatic differential steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “John Deere 9400T”

How much does a 9400T weigh?

A 9400T weighs 42,454 lb (19,257 kg) unladen.

Weights & dimensions — 9400T weights and dimensions
Unladen weight42,454 lb · 19,257 kg
Maximum permissible mass50,045 lb · 22,700 kg
Wheelbase111.0 in · 2,819 mm
Length237.0 in · 6,020 mm
Width143.5 in · 3,646 mm
Height136.0 in · 3,454 mm
Ground clearance14.5 in · 368 mm
Front track106.0 in · 2,692 mmWikibooks gives one track for both axles
Rear track106.0 in · 2,692 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “John Deere 9400T”

What oil does a 9400T take, and how much?

A 9400T engine takes 44.0 qt (41.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

9400T fluid capacities, grades and service intervals
SystemCapacity
Engine oil44.0 qt · 41.6 LSource: Traktorenlexikon, “John Deere 9400T” · single source, not independently verified
Transmission259.9 qt · 246.0 LSource: Traktorenlexikon, “John Deere 9400T” · single source, not independently verified
Hydraulic91.9 qt · 87.0 LSource: Traktorenlexikon, “John Deere 9400T” · single source, not independently verified
Cooling system63.4 qt · 60.0 LSource: Traktorenlexikon, “John Deere 9400T” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

How much fuel does a 9400T burn per hour?

Measured on OECD Test 1967 (tested as the 9400T (Rubber tracklaying tractor)), at each condition the laboratory recorded.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 1967
Test conditionFuel per hour
Maximum PTO powerPTO 258.4 kW (346.5 hp) at 923 rpm71.34 L/h 18.85 gal/h
Rated engine speedPTO 223.5 kW (299.7 hp) at 1,108 rpm66.85 L/h 17.66 gal/h
Standard PTO speedPTO 247.5 kW (331.9 hp) at 1,000 rpm67.79 L/h 17.91 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 1967

Common questions about the John Deere 9400T

Is a 9400T two-wheel drive or four-wheel drive?

The John Deere 9400T is a tracked machine.

What PTO does a 9400T have?

A 9400T has a independent 1000 rpm rear PTO on a 1 3/4"- 20 teilig shaft.

Sources and how this page was built

Compiled from OECD tractor test report 1967; and Traktorenlexikon, “John Deere 9400T”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 967: John Deere 9400T — Licence not stated by the publisher; facts cited, OECD-1967 · published 2001-09-19 · retrieved 2026-09-14. OECD. Original document
  2. Traktorenlexikon: John Deere 9400T — CC BY-SA 4.0, WIKIBOOKS-TL-106331 · revision 876901. Wikibooks contributors (Traktorenlexikon). Original document