John Deere 8130 Dimensions & weights

An 8130 is 233.8 in (5,938 mm) long, 118.6 in (3,012 mm) wide and 124.2 in (3,155 mm) tall.

An 8130 weighs 21,319–23,307 lb (9,670–10,572 kg) unballasted, depending on configuration.

12 dimension and weight values on record for the 8130.

Measured at the PTO shaft

208.3 hp

Source · OECD Test 2376, measured

How big is an 8130?

An 8130 is 233.8 in (5,938 mm) long, 118.6 in (3,012 mm) wide and 124.2 in (3,155 mm) tall.

Dimensions — 8130 Dimensions
Wheelbase	120.1–126.8 in · 3,050–3,220 mmVaries by configuration: 3,050 mm or 3,220 mmOn record for 2 of 3 configurationstwo-wheel-drive versionfour-wheel-drive version
Length	233.8 in · 5,938 mmOn record for 1 of 3 configurations
Width	118.6 in · 3,012 mmOn record for 1 of 3 configurations
Height to top	124.2 in · 3,155 mmOn record for 1 of 3 configurations
Ground clearance	13.2–17.3 in · 336–440 mmVaries by configuration: 336 mm or 440 mmOn record for 2 of 3 configurationstwo-wheel-drive versionfour-wheel-drive version
Front track	64.0–88.0 in · 1,625–2,235 mmOn record for 1 of 3 configurations
Rear track	60.0–106.7 in · 1,524–2,710 mmOn record for 1 of 3 configurations

Source · Traktorenlexikon, “John Deere 8130”

An 8130 weighs 21,319–23,307 lb (9,670–10,572 kg) unballasted, depending on configuration.

Weights — 8130 Weights
Weight, unballasted	21,319–23,307 lb · 9,670–10,572 kgVaries by configuration: 9,670 kg or 10,572 kgOn record for 2 of 3 configurationstwo-wheel-drive versionfour-wheel-drive version
Maximum permissible mass	30,865 lb · 14,000 kgOn record for 1 of 3 configurations

Source · Traktorenlexikon, “John Deere 8130”

Tyre sizes for the 8130 are below.

Tyres — 8130 Tyres
Front tyre, standard	11.00-24 ASF (A: 420/90 R 30 AS)On record for 1 of 3 configurations
Rear tyre, standard	480/80 R 46 ASOn record for 1 of 3 configurations

Source · Traktorenlexikon, “John Deere 8130”

OECD Test 2376 recorded the tyres below.

OECD Test 2376 — 8130 as tested, configuration as printed: “4 WD · Power Shift Transmission (PST) - MFWD - 40 km/h”
Tested mass without ballast	21,330 lb · 9,675 kg

Source · OECD test report 2376, 2007

12 dimension and weight values from Traktorenlexikon, “John Deere 8130”; and OECD test report 2376, 2007.

Last verified

Not yet verified

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

OECD Code 2 test report 2/2 376: John Deere 8130 — Licence not stated by the publisher; facts cited, OECD-2376 · published 2007-08-27 · retrieved 2026-09-14. OECD. Original document
Traktorenlexikon: John Deere 8130 — CC BY-SA 4.0, WIKIBOOKS-TL-47842 · revision 882975. Wikibooks contributors (Traktorenlexikon). Original document