• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×2
  • 1997–2002

WhichTractor size, not the maker’s category

John Deere 7410 Hydraulics & PTO specifications

20 hydraulics and PTO values on record for the 7410.

Measured at the PTO shaft

109.4 hp

Source · OECD Test 1750, measured

What hydraulics does a 7410 have?

Hydraulic and hitch specifications for the 7410 are below.

Hydraulics & hitch — 7410 Hydraulics & hitch
Hydraulic centreClosed centreSource 1
Hydraulic controlLoad sensingOn record for 1 of 4 configurations
Pump flow26.9 gpm · 101.8 L/minOn record for 1 of 4 configurations
Hydraulic pressure2,538 psi · 175 barOn record for 1 of 4 configurations
Rear remote valves4On record for 1 of 4 configurations

Source · Traktorenlexikon, “John Deere 7410”

What PTO does a 7410 have?

A 7410 has a 540/1000 rpm rear PTO.

PTO — 7410 PTO
Rear PTO driveEngine-drivenOn record for 1 of 4 configurations
Rear PTO independenceIndependentOn record for 1 of 4 configurations
PTO engages under loadYesOn record for 1 of 4 configurations
Rear PTO speeds540/1000 rpmSource 2
Engine speed at 540 PTO2,080 rpmOn record for 1 of 4 configurations
Rear PTO shaft35 mm, 6 splines / 35 mm, 21 splinesSource 2

Source · Traktorenlexikon, “John Deere 7410”

How much power does a 7410 deliver at the PTO?

On OECD Test 1750, the 7410 delivered 109.4 hp (81.6 kW) at the PTO shaft, at maximum power.

OECD Test 1750 — 7410 as tested, configuration as printed: “4 WD · MFWD - SyncroPlus - 30 km/h”
PTO power, at maximum power109.4 hp · 81.6 kWAt 836 PTO rpmAt 1,750 engine rpm
PTO power, at rated engine speed106.3 hp · 79.3 kWAt 1,003 PTO rpmAt 2,100 engine rpm
PTO power, at standard PTO speed106.3 hp · 79.3 kWAt 1,003 PTO rpmAt 2,100 engine rpm
PTO shaft speed, at maximum power836 rpm
PTO shaft speed, at rated engine speed1,003 rpm
PTO shaft speed, at standard PTO speed1,003 rpm
Hydraulic power, at maximum power37.7 hp · 28.1 kW
Hydraulic pump delivery, at maximum power25.0 gpm · 94.6 L/min
Three-point lift force10,454 lbf · 46.5 kN

Source · OECD test report 1750, 1998

How much PTO power did the 7410 deliver on Test 1751?

On OECD Test 1751, the 7410 delivered 109.6 hp (81.7 kW) at the PTO shaft, at maximum power.

OECD Test 1751 — 7410 as tested, configuration as printed: “4 WD · MFWD - PowrQuad - 30 km/h”
PTO power, at maximum power109.6 hp · 81.7 kWAt 906 PTO rpmAt 1,900 engine rpm
PTO power, at rated engine speed106.3 hp · 79.3 kWAt 1,002 PTO rpmAt 2,100 engine rpm
PTO power, at standard PTO speed106.3 hp · 79.3 kWAt 1,002 PTO rpmAt 2,100 engine rpm
PTO shaft speed, at maximum power906 rpm
PTO shaft speed, at rated engine speed1,002 rpm
PTO shaft speed, at standard PTO speed1,002 rpm
Hydraulic power, at maximum power37.3 hp · 27.8 kW
Hydraulic pump delivery, at maximum power25.1 gpm · 95.0 L/min
Three-point lift force10,454 lbf · 46.5 kN

Source · OECD test report 1751, 1998

Where this page comes from

20 hydraulics and PTO values from OECD test report 1750, 1998; Traktorenlexikon, “John Deere 7410”; and OECD test report 1751, 1998.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 750: John Deere 7410 — Licence not stated by the publisher; facts cited, OECD-1750 · published 1998-04-29 · retrieved 2026-09-14. OECD. Original document
  2. OECD Code 2 test report 2/1 751: John Deere 7410 — Licence not stated by the publisher; facts cited, OECD-1751 · published 1998-04-28 · retrieved 2026-09-14. OECD. Original document
  3. Traktorenlexikon: John Deere 7410CC BY-SA 4.0, WIKIBOOKS-TL-106377 · revision 877933. Wikibooks contributors (Traktorenlexikon). Original document