• Standard layout
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1960–1963
  • 59,000 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 4010 specs: hp, weight, years

Deere 380 CID six-cylinder diesel. The manufacturer claimed 80 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

80 hp

60 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 4010”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,980 lb
Hyd. flow
18.0 gpm
Top speed
19.9 mph

John Deere 4010 specs: key facts

  • The John Deere 4010 was built from 1960 to 1963.

  • The John Deere 4010 has a claimed engine power (gross or net not stated) of 60 kW (80 hp); it has no measured PTO figure.

  • The John Deere 4010 is two-wheel drive (2WD).

  • The John Deere 4010 has a Deere 380 CID engine, a 6-cylinder 6.23 L diesel unit.

  • The John Deere 4010 weighs 3,166 kg (6,980 lb) unladen.

  • The John Deere 4010 has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the John Deere 4010 delivers 68.0 L/min (18.0 gpm).

Source · Traktorenlexikon, “John Deere 4010”

How does the 4010 compare with its class?

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 370 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 380 comparable records. How we work this out

Illustration of the 1960–1963 John Deere 4010, a 80 hp farm tractor, operator station not recorded — shown as an open platform, a drawing generated from its specification record
Illustration — not a photograph · operator station not recorded — shown as an open platform

How much horsepower does a 4010 have?

The only figure for the 4010 is 80 hp (60 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
80 hp

Source · Traktorenlexikon, “John Deere 4010”

What engine is in a 4010?

A 4010 has a Deere 380 CID, a 6-cylinder 6.23 L diesel engine.

Engine — 4010 engine specifications
Make & modelDeere 380 CID
Cylinders6, liquid-cooled
Displacement380.0 ci · 6.23 L

Source · Traktorenlexikon, “John Deere 4010”

How much will a 4010 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 4010 are below.

Hydraulics & PTO — 4010 hydraulics and PTO specifications
Pump flow18.0 gpm · 68.0 L/min
Hitch categoryCategory 2
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “John Deere 4010”

What transmission does a 4010 have?

Transmission specifications for the 4010 are below.

Transmission — 4010 transmission specifications
ClutchDry double clutch for independent coupling of drive and power take-off
BrakesOil-cooled disc brakes in rear axle reduction gear
SteeringHydraulic steering acting via rack and pinion directly on tie rods
Top speed19.9 mph · 32.0 km/h

Source · Traktorenlexikon, “John Deere 4010”

How much does a 4010 weigh?

A 4010 weighs 6,980 lb (3,166 kg) unladen.

Weights & dimensions — 4010 weights and dimensions
Unladen weight6,980 lb · 3,166 kg
Wheelbase99.2 in · 2,520 mm
Length164.6 in · 4,180 mm
Width92.5 in · 2,350 mm
Height95.3 in · 2,420 mm

Source · Traktorenlexikon, “John Deere 4010”

What oil does a 4010 take, and how much?

Fluid capacities for the 4010 are below.

4010 fluid capacities, grades and service intervals
SystemCapacity
Cooling system24.0 qt · 22.7 LSource: Traktorenlexikon, “John Deere 4010” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 4010?

Within 10% of its 80 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the John Deere 4010

Is a 4010 two-wheel drive or four-wheel drive?

The John Deere 4010 is two-wheel drive (2WD).

What PTO does a 4010 have?

A 4010 has a 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “John Deere 4010”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere 4010 — CC BY-SA 4.0, WIKIBOOKS-TL-49796 · revision 1079864. Wikibooks contributors (Traktorenlexikon). Original document