12 material differences

Tractor oneDeutz-Fahr DX 1601978–1984No measured PTO figureTractor twoJ.I. Case 22901978–1983No measured PTO figure

Which should you choose?

Read our verdict on the DX 160 and the 2290 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 160 and J.I. Case 2290, field by field
Field	DX 160	2290	Gap
Engine
Engine power, claimed claimed	148.0 hp	147.9 hp	—
Engine declared	KHD BF6L 913	CASE 504 BDT	differs
Displacement declared	6.13 L	8.26 L	+35% 2290
Maximum torque declared	393 lb·ft · 533 N·m	451 lb·ft · 611 N·m	+15% 2290
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5–18.6 mph · 25–30 km/h	—
Clutch declared	Pedal operated, dry single-disc clutch	Pedal operated wet disc clutch	differs
Hydraulics & hitch
Pump flow declared	15.4 gpm · 58.4 L/min	21.0 gpm · 79.5 L/min	+36% 2290
Pressure declared	3,771 psi · 260 bar	—	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	12,769–13,700 lb · 5,792–6,214 kg	differs
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	103.6 in · 2,631 mm	104.0 in · 2,642 mm	—
Length declared	185.4 in · 4,710 mm	175.5 in · 4,458 mm	+6% DX 160
Width declared	93.3 in · 2,370 mm	96.0 in · 2,438 mm	—
Height, over the cab declared	107.5 in · 2,730 mm	115.0 in · 2,921 mm	+7% 2290
Ground clearance declared	23.8 in · 605 mm	16.0 in · 406 mm	+49% DX 160
Turning radius, braked declared	14.7 ft · 4.47 m	12.1 ft · 3.68 m	+21% DX 160
Fuel tank declared	158.5 qt · 150 L	259.9 qt · 246.0 L	+64% 2290

Source

Source