• Vehicle type: unspecified
  • WhichTractor size: Utility
  • No lab test on file
  • 1955–1961
  • 28,000 built

It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

International Harvester B-250 specs: hp, weight, years

INTERNATIONAL HARVESTER BD-144 four-cylinder diesel. The manufacturer claimed 29.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

29.6 hp

22.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC B-250”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,333 lb
Hyd. flow
5.0 gpm
Top speed
12.4 mph

International Harvester B-250 specs: key facts

  • The International Harvester B-250 was built from 1955 to 1961.Source 1

  • The International Harvester B-250 has a claimed engine power (gross or net not stated) of 22.1 kW (29.6 hp); it has no measured PTO figure.Source 1

  • The International Harvester B-250 is two-wheel drive (2WD).Source 1

  • The International Harvester B-250 has a INTERNATIONAL HARVESTER BD-144 engine, a 4-cylinder 2.36 L diesel unit.

  • The International Harvester B-250 weighs 1,512 kg (3,333 lb) unladen.

  • The International Harvester B-250 has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the International Harvester B-250 delivers 18.9 L/min (5.0 gpm).

Source · Traktorenlexikon, “McCormick B-250”

Illustration of the 1955–1961 International Harvester B-250, a 30 hp farm tractor, operator station not recorded — shown as an open platform, a drawing generated from its specification record
Illustration — not a photograph · operator station not recorded — shown as an open platform

How much horsepower does a B-250 have?

The only figure for the B-250 is 29.6 hp (22.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
29.6 hp

Source · Traktorenlexikon, “IHC B-250”

What engine is in a B-250?

A B-250 has an INTERNATIONAL HARVESTER BD-144, a 4-cylinder 2.36 L diesel engine.

Engine — B-250 engine specifications
Make & modelINTERNATIONAL HARVESTER BD-144
Cylinders4, liquid-cooledSource 1
Displacement144.0 ci · 2.36 L
Max torque105 lb·ft · 142 N·m @ 1,600 rpmSource 1
Electrical system12 V

Source · Traktorenlexikon, “McCormick B-250”

How much will a B-250 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the B-250 are below.

Hydraulics & PTO — B-250 hydraulics and PTO specifications
Pump flow5.0 gpm · 18.9 L/minSource 2
Rear PTODependent, transmission-driven, 540 rpmSource 2
PTO shaft1 1/8"- 6 splines

Source · Traktorenlexikon, “IHC B-250”

What transmission does a B-250 have?

Transmission specifications for the B-250 are below.

Transmission — B-250 transmission specifications
SteeringMechanical GEMMER steering
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “McCormick B-250”

How much does a B-250 weigh?

A B-250 weighs 3,333 lb (1,512 kg) unladen.

Weights & dimensions — B-250 weights and dimensions
Unladen weight3,333 lb · 1,512 kg
Wheelbase74.1 in · 1,883 mmSource 1
Length151.4 in · 3,845 mm
Width63.8 in · 1,620 mm
Height59.2 in · 1,503 mm
Ground clearance15.6 in · 397 mm
Front track48.0–76.0 in · 1,219–1,930 mmWikibooks gives one track for both axles
Rear track48.0–76.0 in · 1,219–1,930 mmWikibooks gives one track for both axles
Turning radius, braked10.2 ft · 3.12 mSource 1

Source · Traktorenlexikon, “McCormick B-250”

What oil does a B-250 take, and how much?

A B-250 engine takes 6.3 qt (6.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

B-250 fluid capacities, grades and service intervals
SystemCapacity
Engine oil6.3 qt · 6.0 LSource: Traktorenlexikon, “IHC B-250” · single source, not independently verified
Transmission19.0 qt · 18.0 LSource: Traktorenlexikon, “McCormick B-250” · single source, not independently verified
Hydraulic12.2 qt · 11.5 LSource: Traktorenlexikon, “IHC B-250” · single source, not independently verified
Cooling system10.6 qt · 10.0 LSource: Traktorenlexikon, “McCormick B-250” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a B-250?

Within 10% of its 29.6 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the International Harvester B-250

Is a B-250 two-wheel drive or four-wheel drive?

The International Harvester B-250 is two-wheel drive (2WD).

What PTO does a B-250 have?

A B-250 has a dependent 540 rpm rear PTO on a 1 1/8"- 6 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “McCormick B-250”; and Traktorenlexikon, “IHC B-250”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC B-250 — CC BY-SA 4.0, WIKIBOOKS-TL-118442 · revision 1031602. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: McCormick B-250 — CC BY-SA 4.0, WIKIBOOKS-TL-117931 · revision 1059865. Wikibooks contributors (Traktorenlexikon). Original document