• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1971–1973
  • 10,799 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

International Harvester 766 Full specifications

INTERNATIONAL HARVESTER C-291 six-cylinder. The manufacturer claimed 78.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

78.9 hp

58.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 766”, claimed

Weight
11,341 lb
Hyd. flow
12.0 gpm
Top speed
18.6 mph

International Harvester 766 specs: key facts

  • The International Harvester 766 was built from 1971 to 1973.

  • The International Harvester 766 has a claimed engine power (gross or net not stated) of 58.8 kW (78.9 hp); it has no measured PTO figure.

  • The International Harvester 766 is two-wheel drive (2WD).

  • The International Harvester 766 has a INTERNATIONAL HARVESTER C-291 engine, a 6-cylinder unit.Source 1

  • The International Harvester 766 weighs 5,144 kg (11,341 lb) unladen.

  • The International Harvester 766 has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the International Harvester 766 delivers 45.5 L/min (12.0 gpm).

Source · Traktorenlexikon, “IHC 766”

How much horsepower does a 766 have?

The only figure for the 766 is 78.9 hp (58.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
78.9 hp

Source · Traktorenlexikon, “IHC 766”

What engine is in a 766?

A 766 has an INTERNATIONAL HARVESTER C-291, a 6-cylinder engine.

Engine — 766 engine specifications
Make & modelINTERNATIONAL HARVESTER C-291
Cylinders6, liquid-cooledSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Farmall Farmall 756”

How much will a 766 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 766 are below.

Hydraulics & PTO — 766 hydraulics and PTO specifications
Pump flow12.0 gpm · 45.5 L/min
Hitch categoryCategory 2
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “IHC 766”

What transmission does a 766 have?

Transmission specifications for the 766 are below.

Transmission — 766 transmission specifications
ClutchPedal-operated DYNA-LIFE clutch
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “IHC 766”

How much does a 766 weigh?

A 766 weighs 11,341 lb (5,144 kg) unladen.

Weights & dimensions — 766 weights and dimensions
Unladen weight11,341 lb · 5,144 kg
Wheelbase104.8 in · 2,662 mmF: 2,609
Length165.0 in · 4,191 mm
Width98.0 in · 2,489 mm
Height105.0 in · 2,667 mm
Ground clearance14.0 in · 356 mm
Front track60.0–86.0 in · 1,524–2,184 mmF: 203/406; the article lists alternatives
Rear track56.0–100.0 in · 1,422–2,540 mm
Turning radius, braked11.2 ft · 3.40 mF: 2,946

Source · Traktorenlexikon, “IHC 766”

Which tractors compare with a 766?

Within 10% of its 78.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 766 two-wheel drive or four-wheel drive?

The International Harvester 766 is two-wheel drive (2WD).

What PTO does a 766 have?

A 766 has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Farmall Farmall 756”; and Traktorenlexikon, “IHC 766”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Farmall Farmall 756CC BY-SA 4.0, WIKIBOOKS-TL-118751 · revision 1054991. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: IHC 766CC BY-SA 4.0, WIKIBOOKS-TL-118866 · revision 1034716. Wikibooks contributors (Traktorenlexikon). Original document