12 material differences
Tractor oneInternational Harvester FU-267 D1961No measured PTO figureTractor twoSOMECA SOM-30 B1960–1963No measured PTO figure
Which should you choose?
Read our verdict on the FU-267 D and the SOM-30 B → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | FU-267 D | SOM-30 B | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.5 hp | 34.5 hp | — |
| Engine declared | INTERNATIONAL HARVESTER FD-136 M | O.M.-FIAT 605 D 015 | differs |
| Displacement declared | 2.23 L | 1.90 L | +17% FU-267 D |
| Maximum torque declared | 100 lb·ft · 135 N·m | 74 lb·ft · 101 N·m | +34% FU-267 D |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 12.4 mph · 20 km/h | +5% SOM-30 B |
| Clutch declared | — | Pedal-operated two-stage dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.6 L/min | 4.4 gpm · 16.5 L/min | +13% FU-267 D |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 549 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,012 lb · 1,820 kg | 3,770 lb · 1,710 kg | +6% FU-267 D |
| Wheelbase declared | 70.1 in · 1,780 mm | 69.9 in · 1,776 mm | — |
| Length declared | 122.0 in · 3,100 mm | 113.4 in · 2,880 mm | +8% FU-267 D |
| Width declared | 81.9 in · 2,080 mm | 59.1–86.6 in · 1,500–2,200 mm | differs |
| Ground clearance declared | 13.8 in · 350 mm | 15.7 in · 400 mm | +14% SOM-30 B |
| Turning radius, braked declared | 8.6 ft · 2.62 m | 10.8 ft · 3.30 m | +26% SOM-30 B |
| Fuel tank declared | 45.4 qt · 43.0 L | 41.2 qt · 39.0 L | +10% FU-267 D |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester FU-267 D sources
Source
- Source: Traktorenlexikon, “McCormick FU-267 D”
- Source: Traktorenlexikon, “McCormick F-267 D”
SOMECA SOM-30 B sources
Source
- Source: Traktorenlexikon, “Someca SOM 30 B”