• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1958–1962
  • 8,046 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

International Harvester D-214 Full specifications

INTERNATIONAL-HARVESTER DD-66 two-cylinder diesel. The manufacturer claimed 13.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

13.8 hp

10.3 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “McCormick D-214 Standard”, claimed

Weight
2,538 lb
3-point lift
661 lb
Hyd. flow
5.0 gpm
Top speed
11.8 mph

International Harvester D-214 specs: key facts

  • The International Harvester D-214 was built from 1958 to 1962.

  • The International Harvester D-214 has a claimed engine power (gross or net not stated) of 10.3 kW (13.8 hp); it has no measured PTO figure.

  • The International Harvester D-214 is two-wheel drive (2WD).

  • The International Harvester D-214 has a INTERNATIONAL-HARVESTER DD-66 engine, a 2-cylinder 1.09 L diesel unit.Source 2

  • The International Harvester D-214 weighs 1,151 kg (2,538 lb) unladen.

  • The International Harvester D-214 has a dependent rear PTO running at 540 rpm.

  • The three-point hitch of the International Harvester D-214 lifts 300 kg (661 lb) at the lower-link ends.

  • The hydraulic pump of the International Harvester D-214 delivers 19.0 L/min (5.0 gpm).

Source · Traktorenlexikon, “McCormick D-214 Standard”

How much horsepower does a D-214 have?

The only figure for the D-214 is 13.8 hp (10.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
13.8 hp

Source · Traktorenlexikon, “McCormick D-214 Standard”

What engine is in a D-214?

A D-214 has an INTERNATIONAL-HARVESTER DD-66, a 2-cylinder 1.09 L diesel engine.

Engine — D-214 engine specifications
Make & modelINTERNATIONAL-HARVESTER DD-66Source 2
Cylinders2, liquid-cooledSource 2
Displacement66.4 ci · 1.09 LSource 2
Max torque38 lb·ft · 51 N·m @ 1,200 rpm
Electrical system12 V

Source · Traktorenlexikon, “McCormick D-214 Standard”

How much will a D-214 lift, and what is its hydraulic flow?

A D-214 lifts 661 lb (300 kg) at the lower-link ends.

Hydraulics & PTO — D-214 hydraulics and PTO specifications
Pump flow5.0 gpm · 19.0 L/min
Lift at ends661 lb · 300 kg
Rear PTODependent, transmission-driven, 540 rpmGround-speed PTO available
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “McCormick D-214 Standard”

What transmission does a D-214 have?

Transmission specifications for the D-214 are below.

Transmission — D-214 transmission specifications
ClutchPedal-operated dry Fichtel & Sachs single-plate clutch
BrakesPedal-operated transmission brake, combinable as individual wheel brake
Top speed11.8 mph · 19 km/h

Source · Traktorenlexikon, “McCormick D-214 Standard”

How much does a D-214 weigh?

A D-214 weighs 2,538 lb (1,151 kg) unladen.

Weights & dimensions — D-214 weights and dimensions
Unladen weight2,538 lb · 1,151 kg
Maximum permissible mass3,527 lb · 1,600 kg
Wheelbase68.1 in · 1,730 mm
Length105.2 in · 2,672 mm
Width62.2 in · 1,581 mm
Height54.2 in · 1,376 mm
Ground clearance13.9 in · 352 mm
Front track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Turning radius, braked8.0 ft · 2.45 m

Source · Traktorenlexikon, “McCormick D-214 Standard”

Which tractors compare with a D-214?

Within 10% of its 13.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a D-214 two-wheel drive or four-wheel drive?

The International Harvester D-214 is two-wheel drive (2WD).

What PTO does a D-214 have?

A D-214 has a dependent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

What serial numbers does a D-214 carry?

The source prints serial numbers NT 300.501 to 308.547. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.

Where this page comes from

Compiled from Traktorenlexikon, “McCormick D-214 Standard”; and Traktorenlexikon, “McCormick DLD 2”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: McCormick D-214 StandardCC BY-SA 4.0, WIKIBOOKS-TL-118055 · revision 1056718. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: McCormick DLD 2CC BY-SA 4.0, WIKIBOOKS-TL-41174 · revision 1022331. Wikibooks contributors (Traktorenlexikon). Original document