- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1975–1986
WhichTractor size, not the maker’s category
IMT 540 Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 540.
Engine power, claimed · gross or net not stated
39.4 hp
29.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IMT 540”, claimed
How much will a 540 lift?
A 540 lifts 3,097 lb (1,405 kg) at the lower-link ends.
| Pump flow | 3.8 gpm · 14.3 L/min |
|---|---|
| Rear remote valves | 3 |
| Three-point hitch category | Category 1 |
| Lift capacity at ball ends | 3,097 lb · 1,405 kg |
| Hitch control | Lifting, lowering, floating position, position and draft control |
Source · Traktorenlexikon, “IMT 540”
What PTO does a 540 have?
A 540 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,685 rpm |
| PTO power, claimed | 33.1 hp · 24.7 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “IMT 540”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “IMT 540”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IMT 540 — CC BY-SA 4.0, WIKIBOOKS-TL-120860 · revision 1057683. Wikibooks contributors (Traktorenlexikon). Original document