WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1982–1992

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

IMT 5100/5106 specs: hp, weight, years

IMR-PERKINS S 46/T (A 6.354) six-cylinder diesel. The manufacturer claimed 103.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

103.5 hp

77.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IMT 5100/5106”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
11,177 lb
3-point lift
8,003 lb
Hyd. flow
10.3 gpm
Top speed
18.6 mph

IMT 5100/5106 specs: key facts

  • The IMT 5100/5106 was built from 1982 to 1992.

  • The IMT 5100/5106 has a claimed engine power (gross or net not stated) of 77.2 kW (103.5 hp); it has no measured PTO figure.

  • The IMT 5100/5106 was offered in two-wheel-drive and four-wheel-drive versions.

  • The IMT 5100/5106 has a IMR-PERKINS S 46/T (A 6.354) engine, a 6-cylinder 5.80 L diesel unit.

  • The IMT 5100/5106 weighs 5,070 kg (11,177 lb) unladen.

  • The IMT 5100/5106 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the IMT 5100/5106 lifts 3,630 kg (8,003 lb) at the lower-link ends.

  • The hydraulic pump of the IMT 5100/5106 delivers 39.0 L/min (10.3 gpm).

Source · Traktorenlexikon, “IMT 5100/5106”

Illustration of the 1982–1992 IMT 5100/5106, a 104 hp farm tractor, four-wheel-drive version · colour not recorded — shown unpainted, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version · colour not recorded — shown unpainted

How much horsepower does a 5100/5106 have?

The only figure for the 5100/5106 is 103.5 hp (77.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
103.5 hp

Source · Traktorenlexikon, “IMT 5100/5106”

What engine is in a 5100/5106?

A 5100/5106 has an IMR-PERKINS S 46/T (A 6.354), a 6-cylinder 5.80 L diesel engine.

Engine — 5100/5106 engine specifications
Make & modelIMR-PERKINS S 46/T (A 6.354)
Cylinders6, liquid-cooled
Displacement353.6 ci · 5.80 L
Max torque256 lb·ft · 347 N·m @ 1,169 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “IMT 5100/5106”

How much will a 5100/5106 lift, and what is its hydraulic flow?

A 5100/5106 lifts 8,003 lb (3,630 kg) at the lower-link ends.

Hydraulics & PTO — 5100/5106 hydraulics and PTO specifications
Pump flow10.3 gpm · 39.0 L/min
Lift at ends8,003 lb · 3,630 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,007 engine rpm

Source · Traktorenlexikon, “IMT 5100/5106”

What transmission does a 5100/5106 have?

Transmission specifications for the 5100/5106 are below.

Transmission — 5100/5106 transmission specifications
ClutchPedal-operated dry Fichtel & Sachs single-disc clutch
BrakesPedal-operated hydraulic wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering with separate oil circuit
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “IMT 5100/5106”

How much does a 5100/5106 weigh?

A 5100/5106 weighs 11,177 lb (5,070 kg) unladen.

Weights & dimensions — 5100/5106 weights and dimensions
Unladen weight11,177 lb · 5,070 kg5106: 5,320
Wheelbase108.3 in · 2,750 mm
Length178.0 in · 4,521 mm
Width82.7 in · 2,100 mm
Height111.0 in · 2,820 mm
Ground clearance18.1 in · 460 mm5106: 380
Front track63.0 in · 1,600 mm
Rear track66.9 in · 1,700 mm
Turning radius, braked13.9 ft · 4.25 m5106: 4,810

Source · Traktorenlexikon, “IMT 5100/5106”

What oil does a 5100/5106 take, and how much?

A 5100/5106 engine takes 16.4 qt (15.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

5100/5106 fluid capacities, grades and service intervals
SystemCapacity
Engine oil16.4 qt · 15.5 LSource: Traktorenlexikon, “IMT 5100/5106” · single source, not independently verified
Transmission & hydraulic63.4 qt · 60.0 LSource: Traktorenlexikon, “IMT 5100/5106” · single source, not independently verified
Front axle9.5 qt · 9.0 LSource: Traktorenlexikon, “IMT 5100/5106” · single source, not independently verified
Cooling system31.7 qt · 30.0 LSource: Traktorenlexikon, “IMT 5100/5106” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 5100/5106?

Within 10% of its 92.4 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the IMT 5100/5106

Is a 5100/5106 two-wheel drive or four-wheel drive?

The IMT 5100/5106 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 5100/5106 have?

A 5100/5106 has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “IMT 5100/5106”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IMT 5100/5106 — CC BY-SA 4.0, WIKIBOOKS-TL-121000 · revision 1059926. Wikibooks contributors (Traktorenlexikon). Original document