13 material differences
Tractor oneIMT 5100/51061982–1992No measured PTO figureTractor twoSOMECA 980 (TD)1979–1983No measured PTO figure
Which should you choose?
Read our verdict on the 5100/5106 and the 980 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 5100/5106 | 980 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.5 hp | 96.7 hp | +7% 5100/5106 |
| Engine declared | IMR-PERKINS S 46/T (A 6.354) | FIAT-IVECO 8065.02.217 | differs |
| Displacement declared | 5.80 L | 5.18 L | +12% 5100/5106 |
| Maximum torque declared | 256 lb·ft · 347 N·m | 237 lb·ft · 321 N·m | +8% 5100/5106 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 5100/5106 |
| Clutch declared | Pedal-operated dry Fichtel & Sachs single-disc clutch | dry Ferodo or Luk double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.3 gpm · 39.0 L/min | 8.4 gpm · 31.8 L/min | +23% 5100/5106 |
| Pressure declared | — | 3,263 psi · 225 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,177 lb · 5,070 kg | 8,320 lb · 3,774 kg | +34% 5100/5106 |
| Wheelbase declared | 108.3 in · 2,750 mm | 101.2 in · 2,570 mm | +7% 5100/5106 |
| Length declared | 178.0 in · 4,521 mm | 152.2 in · 3,865 mm | +17% 5100/5106 |
| Width declared | 82.7 in · 2,100 mm | 76.0–103.5 in · 1,930–2,630 mm | differs |
| Ground clearance declared | 18.1 in · 460 mm | 22.0 in · 560 mm | +22% 980 (TD) |
| Turning radius, braked declared | 13.9 ft · 4.25 m | 12.6 ft · 3.83 m | +11% 5100/5106 |
| Fuel tank declared | 227.2 qt · 215.0 L | 161.7 qt · 153.0 L | +41% 5100/5106 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
IMT 5100/5106 sources
Source
- Source: Traktorenlexikon, “IMT 5100/5106”
SOMECA 980 (TD) sources
Source
- Source: Traktorenlexikon, “Someca 980”
- Source: Traktorenlexikon, “Fiat 980 DT”