WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • Lab tested ×1
  • 1999–2003

WhichTractor size, not the maker’s category

Hürlimann XN-709 Hydraulics & PTO specifications

19 hydraulics and PTO values on record for the XN-709.

Engine power, claimed · gross or net not stated

86.9 hp

64.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Hürlimann XN 709”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

What hydraulics does a XN-709 have?

Hydraulic and hitch specifications for the XN-709 are below.

Hydraulics & hitch — XN-709 Hydraulics & hitch
Hydraulic controlLoad sensing
Pump flow9.2 gpm · 34.9 L/min
Hydraulic pressure3,046 psi · 210 bar
Rear remote valves2
Three-point hitch categoryCategory 2
Lift capacity (point not stated)3,924 lb · 1,780 kg
Front hitch available, optionalYes

Source · Traktorenlexikon, “Hürlimann XN 709”

What PTO does a XN-709 have?

A XN-709 has a 540 rpm / 1000 rpm rear PTO.

PTO — XN-709 PTO
Rear PTO speeds540 rpm / 1000 rpm
Engine speed at 540 PTO2,077 rpm
Front PTO availableYes

Source · Traktorenlexikon, “Hürlimann XN 709”

How much power does a XN-709 deliver at the PTO?

On OECD Test 1828, the XN-709 delivered 81.4 hp (60.7 kW) at the PTO shaft, at maximum power.

OECD Test 1828 — XN-709 as tested, configuration as printed: “4 WD · 45 speeds - L10N874WVT - 40 km/h”
PTO power, at maximum power81.4 hp · 60.7 kWSource 2At 1,022 PTO rpmAt 2,351 engine rpm
PTO power, at rated engine speed81.4 hp · 60.7 kWSource 2At 1,022 PTO rpmAt 2,351 engine rpm
PTO power, at standard PTO speed81.0 hp · 60.4 kWSource 2At 1,000 PTO rpmAt 2,300 engine rpm
PTO shaft speed, at maximum power1,022 rpmSource 2
PTO shaft speed, at rated engine speed1,022 rpmSource 2
PTO shaft speed, at standard PTO speed1,000 rpmSource 2
Hydraulic power, at maximum power12.3 hp · 9.2 kWSource 2
Hydraulic pump delivery, at maximum power9.2 gpm · 34.9 L/minSource 2
Three-point lift force3,485 lbf · 15.5 kNSource 2

Source · OECD test report 1828, 1999

Where this page comes from

19 hydraulics and PTO values from Traktorenlexikon, “Hürlimann XN 709”; and OECD test report 1828, 1999.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 1/1 828: Hürlimann XN 709 — Licence not stated by the publisher; facts cited, OECD-1828 · published 1999-06-18 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
  2. OECD Code 2 test report 1/1 828: Lamborghini Agile 990 S — Licence not stated by the publisher; facts cited, OECD-1828 · published 1999-06-18 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
  3. Traktorenlexikon: Hürlimann XN 709 — CC BY-SA 4.0, WIKIBOOKS-TL-105312 · revision 864833. Wikibooks contributors (Traktorenlexikon). Original document