WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • Lab tested ×1
  • 1999–2003

WhichTractor size, not the maker’s category

Hürlimann XN-708 Hydraulics & PTO specifications

19 hydraulics and PTO values on record for the XN-708.

Engine power, claimed · gross or net not stated

79.0 hp

58.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Hürlimann XN 708”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

What hydraulics does a XN-708 have?

Hydraulic and hitch specifications for the XN-708 are below.

Hydraulics & hitch — XN-708 Hydraulics & hitch
Hydraulic controlLoad sensing
Pump flow8.9 gpm · 33.7 L/min
Rear remote valves2
Three-point hitch categoryCategory 2
Lift capacity (point not stated)4,189 lb · 1,900 kg
Front hitch available, optionalYes

Source · Traktorenlexikon, “Hürlimann XN 708”

What PTO does a XN-708 have?

A XN-708 has a 540 rpm / 1000 rpm rear PTO.

PTO — XN-708 PTO
Rear PTO speeds540 rpm / 1000 rpm
Engine speed at 540 PTO2,077 rpm
Rear PTO shaft1 3/8"- 6 splines
Front PTO availableYes

Source · Traktorenlexikon, “Hürlimann XN 708”

How much power does a XN-708 deliver at the PTO?

On OECD Test 1812, the XN-708 delivered 73.8 hp (55.0 kW) at the PTO shaft, at maximum power.

OECD Test 1812 — XN-708 as tested, configuration as printed: “4 WD · 45 speeds - L10N804WVT - 40 km/h”
PTO power, at maximum power73.8 hp · 55.0 kWSource 2At 1,022 PTO rpmAt 2,350 engine rpm
PTO power, at rated engine speed73.8 hp · 55.0 kWSource 2At 1,022 PTO rpmAt 2,350 engine rpm
PTO power, at standard PTO speed72.7 hp · 54.2 kWSource 2At 1,000 PTO rpmAt 2,300 engine rpm
PTO shaft speed, at maximum power1,022 rpmSource 2
PTO shaft speed, at rated engine speed1,022 rpmSource 2
PTO shaft speed, at standard PTO speed1,000 rpmSource 2
Hydraulic power, at maximum power13.0 hp · 9.7 kWSource 2
Hydraulic pump delivery, at maximum power8.9 gpm · 33.7 L/minSource 2
Three-point lift force4,204 lbf · 18.7 kNSource 2

Source · OECD test report 1812, 1999

Where this page comes from

19 hydraulics and PTO values from Traktorenlexikon, “Hürlimann XN 708”; and OECD test report 1812, 1999.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 1/1 812: Hürlimann XN 708 — Licence not stated by the publisher; facts cited, OECD-1812 · published 1999-03-12 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
  2. OECD Code 2 test report 1/1 812: Lamborghini Agile 880 S — Licence not stated by the publisher; facts cited, OECD-1812 · published 1999-03-12 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
  3. Traktorenlexikon: Hürlimann XN 708 — CC BY-SA 4.0, WIKIBOOKS-TL-105311 · revision 864829. Wikibooks contributors (Traktorenlexikon). Original document