- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1966–1971
- 179 built
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Hürlimann D 200S Hydraulics & PTO specs
8 hydraulics and PTO values on record for the D 200 S.
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Hürlimann D 200 S”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a D 200 S lift?
A D 200 S lifts 4,079 lb (1,850 kg) at the lower-link ends.
| Pump flow | 8.5 gpm · 32.0 L/min |
|---|---|
| Hydraulic pressure | 2,418 psi · 167 bar |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 4,079 lb · 1,850 kg |
Source · Traktorenlexikon, “Hürlimann D 200 S”
What PTO does a D 200 S have?
A D 200 S has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO speeds | 540 rpm / 1000 rpm |
|---|---|
| Engine speed at 540 PTO | 1,728 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| PTO power, claimed | 56.4 hp · 42.1 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Hürlimann D 200 S”
Sources and how this page was built
8 hydraulics and PTO values from Traktorenlexikon, “Hürlimann D 200 S”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Hürlimann D 200 S — CC BY-SA 4.0, WIKIBOOKS-TL-87207 · revision 1079034. Wikibooks contributors (Traktorenlexikon). Original document