- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1971–1975
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 7000 (A) specs: hp, weight, years
Ford 2514 E four-cylinder diesel. The manufacturer claimed 88.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
88.8 hp
66.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 7000”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,215 lb
- 3-point lift
- 5,291 lb
- Hyd. flow
- 5.9 gpm
- Top speed
- 15.5 mph
Ford 7000 (A) specs: key facts
The Ford 7000 (A) was built from 1971 to 1975.
The Ford 7000 (A) has a claimed engine power (gross or net not stated) of 66.2 kW (88.8 hp); it has no measured PTO figure.
The Ford 7000 (A) was offered in two-wheel-drive and four-wheel-drive versions.
The Ford 7000 (A) has a Ford 2514 E engine, a 4-cylinder 4.19 L diesel unit.
The Ford 7000 (A) weighs 2,819 kg (6,215 lb) unladen.
The Ford 7000 (A) has an independent rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the Ford 7000 (A) lifts 2,400 kg (5,291 lb) at the lower-link ends.
The hydraulic pump of the Ford 7000 (A) delivers 22.5 L/min (5.9 gpm).
Source · Traktorenlexikon, “Ford 7000”
How does the 7000 (A) compare with its class?
- Limitation:
A three-point lift at the lower links of 2,400 kg is low for its class — 35% below the median of 3,700 kg across the 267 machines within 10% of its power that hold this figure.
- Limitation:
A hydraulic pump flow of 22.5 L/min is low for its class — 53% below the median of 48.1 L/min across the 293 machines within 10% of its power that hold this figure.
- Limitation:
Eight forward gears is low for its class — 33% below the median of 12 across the 360 machines within 10% of its power that hold this figure.
- Worth knowing:
An unladen mass of 2,819 kg is low for its class — 25% below the median of 3,771 kg across the 366 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 366 comparable records. How we work this out
How much horsepower does a 7000 (A) have?
The only figure for the 7000 (A) is 88.8 hp (66.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 7000”
What engine is in a 7000 (A)?
A 7000 (A) has a Ford 2514 E, a 4-cylinder 4.19 L diesel engine.
| Make & model | Ford 2514 E |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 255.4 ci · 4.19 L |
| Max torque | 236 lb·ft · 320 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 7000”
How much will a 7000 (A) lift, and what is its hydraulic flow?
A 7000 (A) lifts 5,291 lb (2,400 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 5.9 gpm · 22.5 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 5,291 lb · 2,400 kg |
| Rear PTO | Independent, engine-driven, 540 rpm / 1000 rpm @ 1,901 engine rpmEngages under load |
Source · Traktorenlexikon, “Ford 7000”
What transmission does a 7000 (A) have?
Transmission specifications for the 7000 (A) are below.
| Steering | Mechanical recirculating ball steering incl. hydraulic power steering |
|---|---|
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Ford 7000”
How much does a 7000 (A) weigh?
A 7000 (A) weighs 6,215 lb (2,819 kg) unladen.
| Unladen weight | 6,215 lb · 2,819 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 87.5 in · 2,223 mm |
| Length | 143.7 in · 3,650 mm |
| Width | 68.9 in · 1,750 mm |
| Height | 101.6 in · 2,581 mm |
| Ground clearance | 18.7 in · 475 mm |
| Front track | 52.0–80.0 in · 1,321–2,032 mm |
| Rear track | 56.0–80.0 in · 1,422–2,032 mm |
| Turning radius, braked | 9.8 ft · 2.97 m |
Source · Traktorenlexikon, “Ford 7000”
What oil does a 7000 (A) take, and how much?
A 7000 (A) engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.0 qt · 8.5 LSource: Traktorenlexikon, “Ford 7000” · single source, not independently verified |
| Transmission | 54.9 qt · 52.0 LSource: Traktorenlexikon, “Ford 7000” · single source, not independently verified |
| Cooling system | 14.3 qt · 13.5 LSource: Traktorenlexikon, “Ford 7000” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 7000 (A)?
Within 10% of its 78.8 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- Steyr 9078.9 hp PTO, claimed · 1968–1974Side by side with the 7000 (A) →
- Bührer Komfort 685 (A)78.5 hp PTO, claimed · 1974–1978Side by side with the 7000 (A) →
- Bührer GM-29 Super-Six (A)79.2 hp PTO, claimed · 1968–1975Side by side with the 7000 (A) →
- ZETOR 12011/1204578.1 hp PTO, claimed · 1974–1984Side by side with the 7000 (A) →
- Massey Ferguson 3070 (A)77.7 hp PTO, claimed · 1986–1993Side by side with the 7000 (A) →
- International Harvester 78677.5 hp PTO, claimed · 1980–1981Side by side with the 7000 (A) →
Common questions about the Ford 7000 (A)
Is a 7000 (A) two-wheel drive or four-wheel drive?
The Ford 7000 (A) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 7000 (A) have?
A 7000 (A) has a independent 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Ford 7000”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 7000 — CC BY-SA 4.0, WIKIBOOKS-TL-90184 · revision 1023769. Wikibooks contributors (Traktorenlexikon). Original document