- WhichTractor size: Compact
- No lab test on file
- 1983–1991
WhichTractor size, not the maker’s category
Ford 2910 Hydraulics & PTO specs
11 hydraulics and PTO values on record for the 2910.
Engine power, claimed · gross or net not stated
40.5 hp
30.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 2910”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a 2910 have?
Hydraulic and hitch specifications for the 2910 are below.
| Pump flow | 7.7 gpm · 29.0 L/min |
|---|---|
| Hydraulic pressure | 2,553 psi · 176 bar |
| Three-point hitch category | Category 1 |
| Lift capacity (point not stated) | 5,913 lb · 2,682 kg |
| Hitch control | Position control and combination control |
Source · Traktorenlexikon, “Ford 2910”
What PTO does a 2910 have?
A 2910 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,800 rpm |
| PTO power, claimed | 36.1 hp · 26.9 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Ford 2910”
Sources and how this page was built
11 hydraulics and PTO values from Traktorenlexikon, “Ford 2910”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 2910 — CC BY-SA 4.0, WIKIBOOKS-TL-90988 · revision 689333. Wikibooks contributors (Traktorenlexikon). Original document