• Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1979–1982

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 1200 Full specifications

ISHIKAWAJIMA-SHIBAURA LEK-802 D two-cylinder diesel. The manufacturer claimed 15.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

15.2 hp

11.3 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 1200”, claimed

Weight
1,340 lb
3-point lift
882 lb
Hyd. flow
4.1 gpm
Top speed
9.3 mph

Ford 1200 specs: key facts

  • The Ford 1200 was built from 1979 to 1982.

  • The Ford 1200 has a claimed engine power (gross or net not stated) of 11.3 kW (15.2 hp); it has no measured PTO figure.

  • The Ford 1200 is two-wheel drive (2WD).

  • The Ford 1200 has a ISHIKAWAJIMA-SHIBAURA LEK-802 D engine, a 2-cylinder 0.80 L diesel unit.

  • The Ford 1200 weighs 608 kg (1,340 lb) unladen.

  • The Ford 1200 has a rear PTO running at 540 rpm.

  • The three-point hitch of the Ford 1200 lifts 400 kg (882 lb) at the lower-link ends.

  • The hydraulic pump of the Ford 1200 delivers 15.5 L/min (4.1 gpm).

Source · Traktorenlexikon, “Ford 1200”

How much horsepower does a 1200 have?

The only figure for the 1200 is 15.2 hp (11.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
15.2 hp

Source · Traktorenlexikon, “Ford 1200”

What engine is in a 1200?

A 1200 has an ISHIKAWAJIMA-SHIBAURA LEK-802 D, a 2-cylinder 0.80 L diesel engine.

Engine — 1200 engine specifications
Make & modelISHIKAWAJIMA-SHIBAURA LEK-802 D
Cylinders2, liquid-cooled
Displacement49.1 ci · 0.80 L
Electrical system12 V

Source · Traktorenlexikon, “Ford 1200”

How much will a 1200 lift, and what is its hydraulic flow?

A 1200 lifts 882 lb (400 kg) at the lower-link ends of its Category 1 three-point hitch.

Hydraulics & PTO — 1200 hydraulics and PTO specifications
Pump flow4.1 gpm · 15.5 L/min
Hitch categoryCategory 1
Lift at ends882 lb · 400 kg
Rear PTOtransmission-driven, 540 rpm @ 2,155 engine rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Ford 1200”

What transmission does a 1200 have?

Transmission specifications for the 1200 are below.

Transmission — 1200 transmission specifications
ClutchPedal operated dry Daikin double clutch
SteeringMechanical steering
Top speed9.3 mph · 15 km/h

Source · Traktorenlexikon, “Ford 1200”

How much does a 1200 weigh?

A 1200 weighs 1,340 lb (608 kg) unladen.

Weights & dimensions — 1200 weights and dimensions
Unladen weight1,340 lb · 608 kg
Wheelbase47.6 in · 1,210 mm
Length94.9 in · 2,410 mm
Width42.1 in · 1,070 mm
Height78.7 in · 2,000 mm
Ground clearance9.4 in · 240 mm
Front track34.3 in · 870 mm
Rear track35.0–40.9 in · 890–1,040 mm

Source · Traktorenlexikon, “Ford 1200”

Which tractors compare with a 1200?

Within 10% of its 13.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 1200 two-wheel drive or four-wheel drive?

The Ford 1200 is two-wheel drive (2WD).

What PTO does a 1200 have?

A 1200 has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Ford 1200”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 1200CC BY-SA 4.0, WIKIBOOKS-TL-110275 · revision 918384. Wikibooks contributors (Traktorenlexikon). Original document