Ford 1200 vs Ford 1210 (A)

8 material differences · fewer than 12

Tractor one

1979–1982

No measured PTO figure

Tractor two

1983–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 1200 and the 1210 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Ford 1200 and Ford 1210 (A), field by field
Field	1200	1210 (A)	Gap
Engine
Engine power, claimed claimed	15.2 hp	15.8 hp	—
Engine declared	ISHIKAWAJIMA-SHIBAURA LEK-802 D	ISHIKAWAJIMA-SHIBAURA S-723	differs
Displacement declared	0.80 L	0.88 L	+9% 1210 (A)
Maximum torque declared	—	36 lb·ft · 48.8 N·m	—
Transmission
Top speed declared	9.3 mph · 15 km/h	9.3 mph · 15 km/h	—
Clutch declared	Pedal operated dry Daikin double clutch	Pedal-operated dry Daikin dual clutch	differs
Hydraulics & hitch
Pump flow declared	4.1 gpm · 15.5 L/min	4.4 gpm · 16.5 L/min	+6% 1210 (A)
Three-point lift at ends declared	882 lb · 400 kg	882 lb · 400 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	1,340 lb · 608 kg	1,323 lb · 600 kg	—
Wheelbase declared	47.6 in · 1,210 mm	54.7 in · 1,390 mm	+15% 1210 (A)
Length declared	94.9 in · 2,410 mm	100.8 in · 2,560 mm	+6% 1210 (A)
Width declared	42.1 in · 1,070 mm	42.9 in · 1,090 mm	—
Height declared	78.7 in · 2,000 mm	79.1 in · 2,010 mm	—
Ground clearance declared	9.4 in · 240 mm	10.2 in · 260 mm	+8% 1210 (A)
Fuel tank declared	13.9 qt · 13.2 L	19.2 qt · 18.2 L	+38% 1210 (A)

Source

Source