- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1996–1999
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Fiat M 100 Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the M 100.
Engine power, claimed · gross or net not stated
98.7 hp
73.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiatagri M100”, claimed
How much will an M 100 lift?
An M 100 lifts 10,803 lb (4,900 kg) at the lower-link ends.
| Pump flow | 26.3 gpm · 99.6 L/min |
|---|---|
| Hydraulic pressure | 2,408–2,582 psi · 166–178 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 10,803 lb · 4,900 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fiatagri M100”
What PTO does an M 100 have?
An M 100 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,971 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 splines |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Fiatagri M100”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Fiatagri M100”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiatagri M100 — CC BY-SA 4.0, WIKIBOOKS-TL-108915 · revision 990913. Wikibooks contributors (Traktorenlexikon). Original document