WhichTractor
  • Crawler
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1958–1964

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 431 C Full specifications

FIAT 615.000 four-cylinder diesel. The manufacturer claimed 39.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

39.4 hp

29.4 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 431-C”, claimed

Weight
5,148 lb
Hyd. flow
4.4 gpm
Top speed
6.2 mph

Fiat 431 C specs: key facts

  • The Fiat 431 C was built from 1958 to 1964.

  • The Fiat 431 C has a claimed engine power (gross or net not stated) of 29.4 kW (39.4 hp); it has no measured PTO figure.

  • The Fiat 431 C is a tracked machine.

  • The Fiat 431 C has a FIAT 615.000 engine, a 4-cylinder 2.27 L diesel unit.Source 1

  • The Fiat 431 C weighs 2,335 kg (5,148 lb) unladen.

  • The Fiat 431 C has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Fiat 431 C delivers 16.5 L/min (4.4 gpm).

Source · Traktorenlexikon, “Fiat 431-C”

How much horsepower does a 431 C have?

The only figure for the 431 C is 39.4 hp (29.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
39.4 hp

Source · Traktorenlexikon, “Fiat 431-C”

What engine is in a 431 C?

A 431 C has an FIAT 615.000, a 4-cylinder 2.27 L diesel engine.

Engine — 431 C engine specifications
Make & modelFIAT 615.000
Cylinders4, liquid-cooledSource 2
Displacement138.5 ci · 2.27 L
Max torque103 lb·ft · 140 N·m @ 1,600 rpmSource 2
Electrical system24 VSource 2

Source · Traktorenlexikon, “Fiat 415/415 DT”

How much will a 431 C lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 431 C are below.

Hydraulics & PTO — 431 C hydraulics and PTO specifications
Pump flow4.4 gpm · 16.5 L/min
Pressure2,843 psi · 196 bar
Hitch categoryCategory 2
Rear PTO540 rpm @ 2,160 engine rpm
PTO shaft1 3/8" with 6 splines

Source · Traktorenlexikon, “Fiat 431-C”

What transmission does a 431 C have?

Transmission specifications for the 431 C are below.

Transmission — 431 C transmission specifications
Top speed6.2 mph · 10.0 km/h

Source · Traktorenlexikon, “Fiat 431-C”

How much does a 431 C weigh?

A 431 C weighs 5,148 lb (2,335 kg) unladen.

Weights & dimensions — 431 C weights and dimensions
Unladen weight5,148 lb · 2,335 kg
Wheelbase51.9 in · 1,318 mm
Length99.6 in · 2,530 mm
Width43.7 in · 1,110 mm
Height51.2 in · 1,300 mm
Ground clearance10.6 in · 270 mm
Front track33.5 in · 850 mmWikibooks gives one track for both axles
Rear track33.5 in · 850 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fiat 431-C”

Which tractors compare with a 431 C?

Within 10% of its 39.4 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 431 C two-wheel drive or four-wheel drive?

The Fiat 431 C is a tracked machine.

What PTO does a 431 C have?

A 431 C has a 540 rpm rear PTO on a 1 3/8" with 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 431-C”; and Traktorenlexikon, “Fiat 415/415 DT”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 415/415 DT — CC BY-SA 4.0, WIKIBOOKS-TL-74367 · revision 1073294. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fiat 431-C — CC BY-SA 4.0, WIKIBOOKS-TL-121929 · revision 1076552. Wikibooks contributors (Traktorenlexikon). Original document